98.5% Fixed Carbon and S0.05% GPC in steady quality

Ref Price:
Loading Port:
Tianjin
Payment Terms:
TT OR LC
Min Order Qty:
22.4
Supply Capability:
5004 m.t./month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

Introduction

The High-purity Graphitized Petroleum Coke is made from high quality petroleum coke under a temperature of 2800°C. As a high-purity carbon material, it has characteristics of high fixed carbon content, low sulfur, low ash, low porosity, high absorptive character , no residue will be left and save production cost etc.
This product can be used as carbon raiser (Recarburizer) to produce high quality steel, special steel, cast iron and alloy or other related industry. We can get high quality steel if use it. It can also be used in plastic and rubber as an additive.

Features

The graphitized petroleum coke powder (grain) is made by graphitization heat treatment of high-quality low-ash petroleum coke at high temperature of 2800 ° C or above in vacuum. The product is featured by high carbon content, low hardness, high temperature resistance, large porosity and low heat conductivity coefficient. Compared with the traditional natural graphite and calcined coke, it can obviously improve caking property and stabilize friction coefficient, maintains the stable and comfortable braking process, and reduce the damage to mating plate surface, brake noise, wear and cost, and is an ideal material for the friction material plant.

In order to control the package and quality, we send people to inspect the loading at loading port and take samples for third party inspection for everyshipment, and will keep customers updated about the loading condition and the inspection result.it is more and more popular.

Graphite petroleum coke is used in producing casting, it can increase the used quantity of Scrap steel and reduce the quantity of Scrap iron, or use no Scrap iron at all, graphite petroleum coke has high absorptive character, no residue will be left, save production cost.

Specifications

Products

GPC

F.C.%

98.5MIN 

98MIN 

ASH %

0.8MAX

1MAX

V.M.%

0.7 MAX

1 MAX

SULFUR %

0. 05MAX

0.1MAX

MOISTURE %

0.5MAX

0.5MAX

SIZE:

1-5MM 90% min

Package

By MT jumbo Bag

 

Pictures

 

98.5% Fixed Carbon and S0.05% GPC in steady quality

98.5% Fixed Carbon and S0.05% GPC in steady quality

98.5% Fixed Carbon and S0.05% GPC in steady quality

98.5% Fixed Carbon and S0.05% GPC in steady quality

 

FAQ 

1, Usage: used to improve the Carbon content in steel-melting and Ductile iron foundry

2, Characteristic: high carbon, low sulfur, with stable effect for improving the carbon content, high absorptive of carbon.

3, apply: Used in electric furnace steel smelting and cast-iron for improving the carbon content

 

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:What is the simple test method for graphite powder used in casting?
Mainly depends on its carbon content, hand stick a little bit on the white paper uniform, if there is a clear scratch is graphite powder
Q:Graphite and graphite in the end is not a matter I would like to know the graphite and graphite
Graphite is the byname of wool is the same substance.
Q:How to measure the iron content in graphite powder?
Excessive amounts of dilute sulphuric acid can be used to measure the amount of gas produced, and then the amount of iron is calculated according to the amount of gas.
Q:The graphite powder can replace thermal grease?
Although said to graphite filling materials like thermal effect is good, but the graphite conductive properties also need to consider, now made of graphite conductive material used in voltage is not high, such as mobile phone, tablet computer (in this kind of product;
Q:Know how the colloidal graphite powder comes in
There are two ways to make colloidal graphite: (1) mechanical method. Natural graphite is crushed and treated with hydrochloric acid and hydrofluoric acid to remove impurities. Added to the aqueous solution of tannic acid, which is repeatedly inverted into paste. Colloidal graphite can be obtained by adding a certain proportion of water and ammonia, and then by ultrasonic treatment to further reduce the particle size. (2) chemical method. After being purified and crushed, the natural graphite is added with concentrated nitric acid and concentrated sulfuric acid and water at 90 DEG C, and then obtained by cleaning, drying, adding water, ethanol, acetone and other dispersing agents to obtain colloidal graphite. Add stabilizer such as sodium oleate, sulfate and so on, so that graphite particles do not agglomerate. Ammonia transfers the graphite colloid to the gum solution and regulates the pH value.
Q:It's hard to remove a lot of graphite powder on the glass cake. Who has a good way to remove the graphite powder above?
Suggestion: use a certain amount of concentrated nitric acid infiltrated graphite part, nitrate solution the best there is a certain amount of 1-2 weeks (timing can also be placed with a glass rod, pour stirred) acid, diluted with water to acid and then scrub brush. Because the temperature nitric acid reaction is very slow, but the long-term infiltration, the graphite surface. Especially with the glass contact surfaces may be immersed in a small amount of acid, oxidation, then scrub may have the effect.
Q:Does the graphite powder cause explosion? If so, how to prevent the production of graphite products in the workshop?
Dust produced in the process of production of some factories and mines, especially the dust produced in the processing of some organic matters, will explode and burn under certain conditions.(2) adequate air and oxidizing agents;(3) there is fire or strong vibration and friction.Such as effective ventilation and biological film, dust suppression technology, integrated dust suppression technology, dust removal measures, smoking and fire operations are prohibited. A pressure relief valve or other device is arranged in the outer shell of the equipment, and an explosion containment system is adopted. For factories with dust explosion hazards, the design must be strictly carried out according to the technical grade of explosion protection, and ventilation and dust removal systems shall be installed separately. Often wet cleaning workshop floor and equipment, to prevent dust flying and gathering. Ensure that the system has a good airtight, if necessary, in airtight containers or pipes in the flammable dust filled with nitrogen, carbon dioxide and other gases, in order to reduce the content of oxygen, dust suppression explosion.
Q:For thermal grease skills, the more detailed the better
If the fins and the metal cover of the CPU are as smooth as mirrors, they will be 100 percent fully exposed to the best thermal conductivity.
Q:Is graphite powder conductive?
The bottom current may be the internal resistance of the battery is too large, in addition to graphite reasons, the contact state of battery cathode and graphite copper check, graphite powder, no contact measurement, the conductivity of no experience, resistance measurement of graphite column can be compared (with the current large and small current comparison test),
Q:Can graphite be made directly from graphite powder? How about the effect?
Image, graphite powder, like flour, in order to make bar shaped, such as face and water, you need to add something.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range