98.5% Fixed Carbon and S0.05% cargo for steelmaking

Ref Price:
Loading Port:
Tianjin
Payment Terms:
TT OR LC
Min Order Qty:
21.6
Supply Capability:
5006 m.t./month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

Introduction

The High-purity Graphitized Petroleum Coke is made from high quality petroleum coke under a temperature of 2800°C. As a high-purity carbon material, it has characteristics of high fixed carbon content, low sulfur, low ash, low porosity, high absorptive character , no residue will be left and save production cost etc.
This product can be used as carbon raiser (Recarburizer) to produce high quality steel, special steel, cast iron and alloy or other related industry. We can get high quality steel if use it. It can also be used in plastic and rubber as an additive.

Features

The graphitized petroleum coke powder (grain) is made by graphitization heat treatment of high-quality low-ash petroleum coke at high temperature of 2800 ° C or above in vacuum. The product is featured by high carbon content, low hardness, high temperature resistance, large porosity and low heat conductivity coefficient. Compared with the traditional natural graphite and calcined coke, it can obviously improve caking property and stabilize friction coefficient, maintains the stable and comfortable braking process, and reduce the damage to mating plate surface, brake noise, wear and cost, and is an ideal material for the friction material plant.

In order to control the package and quality, we send people to inspect the loading at loading port and take samples for third party inspection for everyshipment, and will keep customers updated about the loading condition and the inspection result. We would advise you to use this cargo

Graphite petroleum coke is used in producing casting, it can increase the used quantity of Scrap steel and reduce the quantity of Scrap iron, or use no Scrap iron at all, graphite petroleum coke has high absorptive character, no residue will be left, save production cost.

Specifications

Products

GPC

F.C.%

98.5MIN 

98MIN 

ASH %

0.8MAX

1MAX

V.M.%

0.7 MAX

1 MAX

SULFUR %

0. 05MAX

0.1MAX

MOISTURE %

0.5MAX

0.5MAX

SIZE:

1-5MM 90% min

Package

By MT jumbo Bag

 

Pictures

 

98.5% Fixed Carbon and S0.05% cargo for steelmaking

98.5% Fixed Carbon and S0.05% cargo for steelmaking

98.5% Fixed Carbon and S0.05% cargo for steelmaking

98.5% Fixed Carbon and S0.05% cargo for steelmaking

 

FAQ 

1, Usage: used to improve the Carbon content in steel-melting and Ductile iron foundry

2, Characteristic: high carbon, low sulfur, with stable effect for improving the carbon content, high absorptive of carbon.

3, apply: Used in electric furnace steel smelting and cast-iron for improving the carbon content

 

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:The principle of a graphite missile
When graphite sticks to point wires, numerous circuits are formed, but they are short circuited.So the circuit was broken.
Q:Antistatic concrete with graphite powder and conductive carbon black, which effect is good?More specific. I don't quite understand
The better conductivity is graphitized carbon, the higher the degree of graphitization, the better the conductivity. In general, the conductivity of graphite is better than that of black carbon (both of which are of high purity, if not of high purity).
Q:Why does an electromagnetic point timer not prick a needle and use toner paper?
With the needle point than the powder paper friction, many experimental results of!
Q:How can graphite paper be made? Can graphite powder be solidified without brittleness?
Single layer graphite paper is thin, thickness less than 1mm, strength is low, it is the raw material of electric heating felt and advanced gasket sealing material. It is widely used. The single graphite paper and multilayer plate are rolled into thick composite boardI hope it works for you
Q:The graphite powder production process and the graphite production process are introduced briefly Graphite powder production process, graphite production process, detailed technical parameters where?
Mainly used in rough rolling, crushing, crushing for hard materials and bulk material; cut is mainly used in crushing, grinding for ductile material; impact is mainly used in grinding, fine grinding, fine grinding, suitable for brittle material grinding; grinding mainly in fine grinding and superfine grinding, suitable for crushing small block and fine particles.
Q:What solvent can be used to dissolve Teflon?
PTFE is not dissolved after Teflon, it is impossible to mix with graphite powder this thing.
Q:Phosphoric acid, two aluminium hydride, with graphite powder and mud
Sunlight filtered through the atmosphere to achieve visible light and a small amount of ultraviolet light (UV) on the earth's surface. UV light has a wavelength of 295nm and UV light accounts for only 5% of the sun. The energy of light is inversely proportional to the wavelength, and the shorter the wavelength, the higher the energy.
Q:What are the specifications of the graphite powder used for conduction?
There are many kinds of specifications. There are 1 grams, 2 grams, 3 grams, which kind do you need?
Q:Does the graphite powder cause explosion? If so, how to prevent the production of graphite products in the workshop?
The graphite powder will cause an explosion. The production of graphite products in the workshop by means of centralized collection and fire protection to avoid explosion.The combustible dust explosion, dust explosion limits in encountered heat (fire or high temperature), flame spread instantly throughout the mixing space dust, fast chemical reactions, while releasing large amounts of heat, resulting in high temperature and high pressure, the system of energy into mechanical energy and light and heat radiation, has a strong destructive power. In the dust explosion with aluminum powder, zinc powder, aluminum powder, grinding a variety of plastic powder, organic synthesis of drug intermediates, wheat flour, sugar, wood, dyes, bakelite ash, milk powder, tea powder, tobacco powder, coal dust, dust and other plant fibers to produce production and processing places.
Q:For thermal grease skills, the more detailed the better
The best way is to let the thermal grease coated metal can directly contact, and can be a very good filler metal surface those small potholes, this effect is the best.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range