82% Alumina 120 Mesh Calcined Bauxite with Low Price

Ref Price:
Loading Port:
Tianjin
Payment Terms:
TT OR LC
Min Order Qty:
25 m.t.
Supply Capability:
30000 m.t./month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

82% Alumina 120 Mesh Calcined Bauxite with Low Price

 

Specifications

1.    We directly supply calcined bauxite 

2.    Al2O3:70%/75%/80%/85%/86%/88%/90% 

3.    Size:0-1-3-5-8-10/200mesh/325mesh/400mesh/500mesh

 

Size:

Lumps /Grains:0-1mm,1-3mm,3-5mm,5-8mm /Powders:100mesh, 200mesh,325mesh

 

Product Description:

Bauxite, alumina or bauxite miner , main ingredients are aluminum oxide, hydrate alumina containing impurities,

is an earthy mineral.White or grey, brown yellow or light red by iron.From 4 to 3.9 g/cm3 density, hardness, 1 ~ 3, opaque, very brittle.

Very difficult to melt.Insoluble in water, soluble in sulfuric acid, sodium hydroxide solution.Mainly used for aluminium, refractory material.

 

Calcined Bauxite Grade:

Shaft Kiln Bauxite

Rotarty Kiln Bauxite

Round Kiln Bauxite

 

Packaging & Delivery

Packaging Details: In bulk or in 1-1.25mr bag

 

Product Pictures:

 

82% Alumina 120 Mesh Calcined Bauxite with Low Price82% Alumina 120 Mesh Calcined Bauxite with Low Price

82% Alumina 120 Mesh Calcined Bauxite with Low Price

82% Alumina 120 Mesh Calcined Bauxite with Low Price82% Alumina 120 Mesh Calcined Bauxite with Low Price

Our Service:

1. Your inquiry related to our products or prices will be replied in 24hours.

2. Manufacturer with large capacity, ensure the fast production cycle after confirmed the order.

3. Our professional technicians will answer your entire enquiry in patient.

4. To meet the refractory solutions, we can serve as your instructions.

5. Protection of sales area and private information for our entire customer.

 

If you’ve kind enquiries, please don’t hesitate to let us know. ^_^


Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:How to detect the acid resistance of refractory? Is there any standard? Thank you
Setting the acid resistancere of fractory products is simple; R22, two measurement methods are both bricking refractory products, using the mass fraction of the original dry to indicate. It is generally select vitriol as the medium of erosion, such as the international standard determination of the resistance to sulfate of dense shaped refractory products "(ISO8890) and PRE /, grinding fine particles to 0.63 ~ 0.80 mm, and then measure its quality loss, put it in the vitriol with mass fraction of 70%, finally boil 6 h.
Q:Which brand of refractory fiber hard thermal insulation board is better?
Thermal insulation materials are divided into two types: porous material and heat reflecting material. The former uses the air void contained in the material to maintain thermal insulation itself for the heat conductivity coefficient of air or inert gas within the voids is low, such as foam material, fibers and other materials; the latter material has a high coefficient of reflection which can reflect the heat, such as gold, silver, nickel, aluminum foil or metallic coated polyester and polyimide thin films. Aerospace industry has strict requirement for the weight and volume of thermal insulation material, and it is often also required to has the properties of noise absorption, vibration attenuation, and anti-corrosion. Different aircrafts have different requirements for thermal insulation materials. Aircraft cabin and cockpit usually use foam, ultra-fine glass wool, high silica cotton to maintain thermal insulation. Earlier missile head uses phenolic foam plastic as thermal insulating material. With the application of polyurethane foam with good thermal endurance, the single insulating material has been developed to sandwich construction. A few millimeters foaming coating is coated on the skin outside the missile instrument bay, it is anti-corrosion coating at room temperature and when aerodynamic heating reach 200 ° C or more, it will generate foam evenly thus maintaining thermal insulation. Artificial earth satellite moves in an environment where the temperature varies from high to low, so it must use laminated thermal insulation material with high reflecting performance, which is usually made up of dozens of layers of aluminum film, aluminized polyester film, and aluminized polyimide film. In addition, the successful development of the surface thermal insulated tiles has solved the problem of thermal insulation of the space shuttle, it also marks a higher level of development of insulation materials.
Q:What is the most reasonable drying heating curve of magnesia refractories? Products of less than 0.5T
You'd better oxidize magnesia preformed unit at room temperature for a longer period of time, then bake it, during which, it's enough to control the maximum temperature within 300 degrees. During the middle process, usually heating up for 4 hours and keep warm for 3 hours. The entire heating up process takes about 20 hours. If it is the site operation magnesia-based castable, it should be heated slowly in the early stage, and pay attention to keeping warm at 80 degrees Celsius. Every manufacturers has their own heating curves, so do not blindly adopt existing curves, try to make your own heating curve.
Q:What's the frequently used refractory material?
Refractory material is generally used in industrial departments like metallurgy, glass, cement, ceramics, machinery, hot working, petrochemical industry, power and national defense. Frequently used common refractory: silica brick, semi-silica brick, clay brick, high alumina brick, magnesia brick, etc. Frequently used special refractory: AZS brick, corundum brick, direct-bonded magnesia-chrome bricks, carborundum brick, calcium oxide, chromium hemitrioxide, alumina, magnesium oxide, etc. Frequently used fireclay insulating refractory: diatomite product, asbestos product, insulation board, etc. Frequently used unshaped refractory: ramming refractory, refractory castable, plastic refractory, refractory mortar, gun-mix refractory, refractory coating, lightweight refractory castables, etc.
Q:What substitutes are available for high-end refractories in addition to zircon sand?
If you want to use environmentally friendly products, please use recycled Mo powder.
Q:What dose the fireproof and thermal insulation material include?
Currently the non-combustible insulation materials for external insulation system mainly are foam insulation board, composite cement foam insulation board, aerated concrete panels, rock wool board (strip), and inorganic insulation materials. 1. foam insulation board refers to foam ceramic insulation panels whose raw material is inorganic ceramic which is calcinated at high temperature with abbreviation of ceramic insulation board 2.Composite cement foam insulation board is a hydrophobic lightweight closed-cell insulation board whose main materials are cement, fly Ash, and silica fume which has been foamed, cured and cut. 3. aerated concrete panel is a lightweight concrete panel which has been autoclaved with lightweight materials, siliceous material and gas former as its raw materials. 4. rock wool panel, with natural igneous rock wool as its main raw material, is a cotton which is melted in high temperature by centrifugation and is pasted by thermosetting resin.
Q:Does anyone know about the fire resistance period of thin fireproof coatings?
The thin fireproof coatings will be expanded when exposing to open fire, and produce the inert gas to extinguish fire, but they will do harm to people, and the coatings are not stable, and the weather resistance and service life of which are short. According to the state regulations, the thin fireproof coatings have the highest fire resistance of only 2.5 hours, while the thick steelwork fireproof coatings have a fire resistance of 3.0 hours or more.
Q:Do you know what the main indicators are for the inspection of refractory materials? Thank you very much for your requests and reports
The main indicators of refractory material inspection must be fire resistance materials, flame retardant, a subdivision of lecture, ignite the smoke toxicity, smoke density, heat release and flue gas;
Q:What kind of refractory materials should be used for the intermediate frequency furnace to smelt manganese?
I am not quite clear. But you should take two aspects into consideration, namely, no pollution and strong durability.
Q:Which are fireproofing external wall materials?
According to combustion performance, external wall thermal insulation materials are classified as Grade-A and Grade-B. Grade-A refers to incombustible material and Grade-B combustible material. A few years ago the fire in CCTV building and Shenyang Hotel were caused by Grade-B material. Currently Grade-A material is more commonly uesd and less expensive than Grade-B material. Grade-A material can be divided into thermal mortar, phenolic foam board, rock wool board, foam cement board, etc. Thermal mortar is easy for construction and unexpensive, but it is also easy for faking due tou its simple procesing. It is recommended to find a large factory whihc has gone through the formalities.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range