80% Alumina 60 Mesh Calcined Bauxite with Low Price

Ref Price:
Loading Port:
Tianjin
Payment Terms:
TT OR LC
Min Order Qty:
25 m.t.
Supply Capability:
30000 m.t./month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

80% Alumina 60 Mesh Calcined Bauxite with Low Price

 

Specifications

1.    We directly supply calcined bauxite 

2.    Al2O3:70%/75%/80%/85%/86%/88%/90% 

3.    Size:0-1-3-5-8-10/200mesh/325mesh/400mesh/500mesh

 

Size:

Lumps /Grains:0-1mm,1-3mm,3-5mm,5-8mm /Powders:100mesh, 200mesh,325mesh

 

Product Description:

Bauxite, alumina or bauxite miner , main ingredients are aluminum oxide, hydrate alumina containing impurities,

is an earthy mineral.White or grey, brown yellow or light red by iron.From 4 to 3.9 g/cm3 density, hardness, 1 ~ 3, opaque, very brittle.

Very difficult to melt.Insoluble in water, soluble in sulfuric acid, sodium hydroxide solution.Mainly used for aluminium, refractory material.

 

Calcined Bauxite Grade:

Shaft Kiln Bauxite

Rotarty Kiln Bauxite

Round Kiln Bauxite

 

Packaging & Delivery

Packaging Details: In bulk or in 1-1.25mr bag

 

Product Pictures:

80% Alumina 60 Mesh Calcined Bauxite with Low Price

80% Alumina 60 Mesh Calcined Bauxite with Low Price

80% Alumina 60 Mesh Calcined Bauxite with Low Price

80% Alumina 60 Mesh Calcined Bauxite with Low Price


Our Service:

1. Your inquiry related to our products or prices will be replied in 24hours.

2. Manufacturer with large capacity, ensure the fast production cycle after confirmed the order.

3. Our professional technicians will answer your entire enquiry in patient.

4. To meet the refractory solutions, we can serve as your instructions.

5. Protection of sales area and private information for our entire customer.

 

If you’ve kind enquiries, please don’t hesitate to let us know. ^_^


Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:What are the models of refractory cables?
NH is the firat letter of "refractory" in Chinese phonetic alphabet; It is V, not W. PVC insulation and sheath; K in KVV represents the control cable. 5 * 10 represents the cable is made up of 5 core cables whose nominal cross section is 10 square milimeter.
Q:Are the specification of fireclay bricks and ordinary clay brick the same?
The standard size of refractory bricks in our country is: 230mm × 114mm × 65mm; ordinary brick: 240 ×115 ×53, building blocks: (it is divided into blind hole and via) 240×390×190, 240×190×190, 240×90×190, 190×190×190, 190×390×190, 190×190×190, 190×90×190, 140×390×190, 140×190×190, 990×200×400, 0×390×190, 90×190×190, 90×90×190. Another is interlocked hollow block : 90×200×400,90×200×245,90×200×200,90×200×100,90×200×290,150×200×275,150×200×200,150×200×100,150×200×290.
Q:What kind of refractory material should be used for common boiler?
Build by using clay refractory mortar. Common clay brick is used as combustion layer. Xindeyuan Refractory Material, red brick is used as external wall. Light clay brick is used as thermal insulation layer, thank you.
Q:What are grades of refractory materials?
Refractories have lots of varieties which all have different purposes. It is necessary to classify refractories scientifically in order to scientifically study, choose and manage them. Classification methods of refractories include chemical properties classification, chemical composition of mineral classification, manufacturing technique classification, morphology of the material classification. 1 divided according to the level of refractoriness: ordinary refractory materials: 1580 ℃ - 1770 ℃, advanced refractories: 1770 ℃ - 2000 ℃ and super refractories: above 2000 ℃ 2, divided in accordance with shapes and sizes : Standard ones: 230mm × 113mm × 65mm, no more than four ruler, (ratio) Max: Min < 4: 1; Shaped ones: no more than two-entrant, (ratio) Max: Min < 6: 1 or having a acute angle of 50 - 70 °; The specific type :( ratio) Max: Min < 8: 1 or having no more than 4-entrants or having an acute angle of 30 - 50 °; and Special products: crucible, containers and tubes. 3, divided according to the method of manufacturing: burned products, non-burned products and unshaped refractories 4. divided according to the chemical properties: acidic refractory materials, neutral refractory materials and basic refractory materials.
Q:How to distinguish the fire resistant level of construction materials?
There are 3 conditions for building components to reach fire endurance, namely: Loss of ability to support; loss of integrity; loss of fire insulation function. As long as one condition occurs, fire endurance is reached and the time before it is called fire endurance. 1), loss of ability to support: If the specimen bearing capacity and rigidity reduce, section area shrink, collapses or deformation exceeds specified numerical value because it cannot bear the load of original design under flame or high temperature, it loses the ability to support. 2), loss of integrity: It mainly refers to the thin wall separating component(such as stairs, windows,partitions, ceiling, etc.) burst or partially collapse under flame or high temperature, and penetrating fracture or opening appears, and the reverse side even burn. For example, when the floor is under flame or at high temperature, the flame spread to the upper room, which indicates that the integrity has been damaged. 3), loss of fire insulation function: It mainly refers to that seperating components loses thermal insulation and excessive heat conduction. In experiment, if the average temperature of component unexposed surface exceeds 140 ℃, or if any spot at the unexposed surface exceed the initial temperature of 180 ℃, the component loses fire insulation function.
Q:The difference between refractory and thermal insulation material
Refractory refers to inorganic non-metallic material, whose refractoriness is not less than 1,580℃, but refractory is not necessarily insulated material. Inorganic thermal insulated material also belongs to refractory as long as its refractoriness is higher than 1,580℃.
Q:What is refractory material?
Q:What are the disadvantages of the refractory industry?
The rapid development of continuous casting technology allows Hua Heng refractories to be improved in variety and quality. The development of refractory for continuous casting has a significant impact on the production of continuous casting and quality of continuous casting billet. Constructing and putting Baosteel into action has greatly pushed the improvement of the refractory technology. Continuous casting refractory is an important part of the continuous casting machine. In addition to the general characteristics of refractories, it is also required functions that can purify molten steel, improve the quality of steel, stabilize temperature and composition of the molten steel, control and regulate the molten steel flow. Therefore, it is known as functional refractories. Continuous casting Refractories include: (1) ladle refractory - ladle lining, permanent lining and ventilation components; (2) tundish refractories - permanent lining, coating, insulating plates, clad etc; (3 ) functional refractories - long nozzle for non-oxidizing casting, submerged nozzle, monolithic stopper, sliding gate; (4) ceramic purifier for purifying molten , slag dam, alkaline paint and horizontal separating ring and gate board for continuous casting.
Q:What's the fire endurance of A grade fireproof glass curtain wall?
According to the latest requirement, fire door has three types of FMA, FMB and FMC, of which A, B, C refer to the class. Take FMA as an example, it refers to A class fire door (namely thermal insulation fire door). The fire endurance of these three types all can be 0.5h, 1.0h, 1.5h, 2.0h or 3.0h, and the specific fire resistance time needs to be determined by the design. Generally the design drawing will make clear of it. As to A class fire door, its fire endurance is 1.5h.
Q:How to determine the fire resistance rating of the aluminium-plastic panel?
The fire resistance rating of the aluminium-plastic panel is determined by two indicators, namely national compulsory standard of GB8624 "Building Materials Combustion Performance Grading Method ", and GB/T17748 "Aluminium-plastic Composite Panel National Standard" . Classifications of combustion performance of building materials in our country are as follows: A class: Incombustible building materials; B1 class: Flame-retardant building materials; B2 class: combustible building material; B3 class: flammable building materials. The fire resistance rating of the aluminium-plastic composite panel shuld be no less than B1 class. 1. Detection indexes and requirements of fireproof aluminum-plastic composite panel (B1 class): (1) Conduct the test according to GB/T8625-88, the average leftover length of each test specimen should be more than 150mm, (any test piece should have leftover length), and the maximum average flue gas temperature of each test should be no more than 200 ℃; (2) Conduct the test according to GB/T8626-88, flame hight indicators.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range