7010 Angular contact ball bearings Bearing
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 200 pc
- Supply Capability:
- 500000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Sepcification:
Angular contact ball bearings can bear radial load and axial load at the same time and also can bear pure axial load. Their ability of axial load is determined by contact angle and is increased with contact angle increasing; speed limit is higher; stiffness is big and can be pre-adjusted. They are applicable to high-speed and high-precision site.
Product application:
- spindle and other high speed precision mechanical spindle
- aircraft engine spindle
- high frequency motor
- printing machinery
- air compressor
- gas turbine
- jet engines
- turbines
-pump
Design ations | Principal dimensions (mm) | 〆15º | 〆25º | ||||
Limit speed | Limit speed | ||||||
d | D | B | Basic load rating | Lubrication | Rated load | Lubrication | |
Cr Cor | Grease Oil | Cr Cor | Grease Oil | ||||
70 Series single angular contact ball bearings | |||||||
7003 | 17 | 35 | 10 | 6.7 4.9 | 44000 66000 | 6.4 4.7 | 39000 59000 |
7004 | 20 | 42 | 12 | 9.6 6.3 | 37000 55000 | 9.2 6.0 | 33000 49000 |
7005 | 25 | 47 | 12 | 12.9 8.7 | 33000 49000 | 12.3 | 29000 44000 |
7006 | 30 | 55 | 13 | 15.7 11.6 | 27000 42000 | 14.9 10.9 | 23000 37000 |
7007 | 35 | 62 | 14 | 19.3 17.5 | 19000 33000 | 10.4 10.3 | 19000 33000 |
7008 | 40 | 68 | 15 | 19.9 19.1 | 18000 31000 | 18.9 18.2 | 16000 27000 |
7009 | 45 | 75 | 16 | 26.7 25.3 | 16000 27000 | 25.4 24.1 | 15000 25000 |
7010 | 50 | 80 | 16 | 27.6 27.5 | 15000 25000 | 26.2 26.2 | 14000 23000 |
7011 | 55 | 90 | 18 | 36.7 37.1 | 13000 21000 | 34.8 35.3 | 12000 19000 |
7012 | 60 | 95 | 18 | 37.8 | 13000 21000 | 35.8 38.0 | 11000 18000 |
7013 | 65 | 100 | 18 | 38.9 42.9 | 12000 19000 | 36.8 40.7 | 10000 17000 |
7014 | 70 | 110 | 20 | 49.9 55.5 | 11000 18000 | 47.2 52.7 | 9000 16000 |
7015 | 75 | 115 | 20 | 51.3 59.2 | 10000 17000 | 48.5 56.2 | 8500 15000 |
7016 | 80 | 125 | 22 | 61.6 70.4 | 9000 16000 | 58.3 66.9 | 8000 14000 |
7017 | 85 | 130 | 22 | 63.6 | 8500 15000 | 59.9 71.3 | 7500 13000 |
7018 | 90 | 140 | 24 | 66.9 | 8000 14000 | 63.2 79.7 | 7000 12000 |
7019 | 95 | 145 | 24 | 79.1 97.6 | 7500 13000 | 74.8 | 6500 11000 |
7020 | 100 | 150 | 24 | 81.2 103.3 | 7000 12000 | 76.7 | 6000 10000 |
7021 | 105 | 160 | 26 | 93.9 118.2 | 6500 11000 | 88.8 | 6000 10000 |
7022 | 110 | 170 | 28 | 110.4 139.8 | 6000 10000 | 104.4 132.8 | 5700 9000 |
7024 | 120 | 180 | 28 | 112.7 148.7 | 6000 10000 | 106.3 141.1 | 5700 9000 |
7026 | 130 | 200 | 33 | 144.8 190.8 | 5700 9000 | 136.8 181.0 | 5000 8000 |
7028 | 140 | 210 | 33 | 148.7 202.6 | 5000 8000 | 140.4 192.2 | 4600 7500 |
7030 | 150 | 225 | 35 | 168.4 232.5 | 4600 7500 | 159.1 220.6 | 4000 6500 |
7032 | 160 | 240 | 38 | 189.1 264.5 | 4000 6500 | 178.6 251.0 | 3800 6000 |
7034 | 170 | 260 | 42 | 205.6 299.3 | 3800 6000 | 194.2 284.0 | 3300 5300 |
7036 | 180 | 280 | 46 | 229.5 352.1 | 3500 5700 | 216.8 334.1 | 3000 5000 |
- Q:The difference between ultra high speed angular contact ball bearings and other plain bearings
- The ability to bear the axial force of angular contact ball bearings than ordinary high speed ball bearings, angular contact ball bearing is slightly lower than the ordinary ball bearings of the same type.
- Q:What is the difference between deep groove ball bearings and angular contact ball bearings?
- Deep groove ball bearings have less carrying capacity, they mainly bear radial load, and can also bear certain axial load at the same time. The friction coefficient is small and the limit speed is high.Increase the bearing capacity of angular contact bearings can bear radial load and axial load, also can withstand the axial load (pure axial load, can bear a direction generally used in pairs), high speed limit.It can be seen that the two bearings differ mainly in the magnitude and direction of the load.
- Q:What are the differences between angular contact bearings AC and A and C?
- Angular contact bearings common suffix has AC, C and B, AC said nominal contact angle a is 25 degrees, C is 15 degrees, B is 40 degrees.
- Q:Do angular contact ball bearings come with a sealing cap?
- Angular contact ball bearings generally have no dust caps or seals. You can design and install an oil seal or something like that.In general, deep groove ball bearings are lubricated with dust cover. Angular contact ball games are generally lubricated with lubricating oil, without dust cover, such as grease lubrication, the effect is poor.
- Q:What are the reasons for the use of tapered roller bearings and angular contact ball bearings?
- Take the radial load and axial load of the shaft evenly, pay attention to the normal and reverse loading, or the axial direction can not be fixed.
- Q:Angular contact ball bearings, how to judge the size of the mouth?
- Angular contact bearing on both sides of the outer ring thickness is not the same thin, over there is big mouth
- Q:Is there a way to calculate the axial force of angular contact ball bearings?
- The rated axial dynamic load of the bearing is: 4300N. Axial force can be calculated by formula. Please consult the professional manual!
- Q:What are the differences between angular contact bearings and deep groove ball bearings?
- The difference between deep groove bearings with the angular contact bearings in the structure is: deep groove bearings and rolling contact rail check section view on the parallel with the axis, the angular contact bearing rail has an open angle in one direction, and the axis or axis of the vertical line and an alpha angle. As shown. No. 6 bearings mainly bear radial force, bearing No. 7 can bear radial force and axial force.
- Q:What does angle contact back to back mean?
- Refers to the installation method, put it is face to face
- Q:What is angular contact ball bearing contact angle?
- The angle between the imaginary line of the contact between the roll and the raceway and the vertical line of the axis of rotation
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
7010 Angular contact ball bearings Bearing
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 200 pc
- Supply Capability:
- 500000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords