Detailed Product Description
1.Quad color led center light
2.Create a variety of color effects
* TRI Color LED Center lighting effect with six scanner
* 6 pcs 15 watt 3-in-1 RGB “TRI Color” LEDs create a variety
of color effects (Red, Green, Blue, Purple, Yellow, Cyan and White)
* Long-life LED: 50,000 hrs
* 4,18 and 22 DMX channels select from control panel
* 4 Operational modes: Auto,DMX,Master/Slave,Sound Active
* Strobe effect
* Test self and Manual test
* Linkable via 3-pin XLR cable
* 4 digital LED display
* Includes hanging bracket
* Very low heat output and power consumption
* Power Supply: 120V-230Vac,50-60Hz
* Power Consumption: 70W
* Light Sources:6 pcs 15 watt 3-in-1 RGB “TRI Color” LEDs
* Dimensions : L544xW496xH175mm
* Weight: 9kg
- Q:Star projection lamp 50
- 3PVC transparent film (film slide projector available instead). 4 markers. 5 star pictures.
- Q:What about "replacing the projector lights and cleaning the screen" on the screen?
- That means that the aging of the projection lamp, or the screen is too dirty and the effect is not good, automatic detection ah, you can clean it again and again, but it is best to find a professional master yo,
- Q:Star projection lamp 10
- Genuine to Yuanhong r us ask, I remember is 2 and 300.Definitely not the Shanzhai thing to order a LED bulbThe tortoise light is ` ` ` trustOr on TB
- Q:Star projection lamp
- Star projection, you can search for this on the Internet, but
- Q:Is the price of projection light expensive?
- The price of projection lamp is determined by various factors, such as projection power, projection distance, ambient brightness and so on, which are expensive and cheap
- Q:KIA K3 all models have a projection lamp which open the door under the K3 logo?
- It is a pedal, have high low, can install their own, not expensive.
- Q:Where can I find a Star Projector in Linyi?
- A lot of places, you can go to some jewelry stores such as seven or female a few to see, or to buy a Taobao.
- Q:LED how far is the new light source projecting from the projection bulb?
- Why LED, laser and xenon lamp at present it is difficult to shake the halogen lamp and UHEUHP lighting the main position? This also and its luminescence characteristics are not unrelated. Xenon lamp and halogen lamp in the car industry competition has shown a personality difference, although xenon lamp performance is good, but can be successfully transplanted to the projector light source, it is still hard to say, currently on the market using xenon lamp projector technology represented by SONY VW200, but its price is high level; laser technology was should be optimistic about whether brightness purity is "perfect", but today Microvision SHOW projector miss, let us begin to have a trace of worry, laser technology also temporarily stranded. As for the LED light source, it has become the most concerned technology at present. Whether it can break through its brightness bottleneck will be the key to whether it can become the mainstream. However, there is one point to note here, which is the color selection of light sources. At present, the projector light source is the basic source of white light, the color wheel or splitting technology to obtain a monochromatic light source is needed, 3LCD is the three chip and display RGB color image, the lens magnification before the image superimposed color effect; and the technique of DLP is used to color light, the color wheel is a few to be able to obtain the corresponding color number (except repeat). Now, laser and LED technology are expected to provide pure monochromatic light source directly, which will have a significant impact on the light path design of the projector, and even change the technical line and market pattern of DLP and 3LCD. The true monochromatic light source can give the projector technical promotion, how much for different projection technology, the light source technology is to close the technical gap of the two or to make it more distinctive, we wait and see.
- Q:Brightness is not the only standard. How can I buy projection light bulb?
- Bulb, as the only consumable material of projector, is an important factor that must be taken into consideration when choosing projectors. At present, projectors are generally used metal halogen lamps, UHE bulbs, UHP bulbs, these three light sources. The metal halogen bulb has the advantage of being cheap, and the drawback is that the half-life is short, and the brightness is reduced to about half of the total time it takes about 1000 hours. And because of high heat, the projector cooling system requirements, it is not suitable for a long time (more than 4 hours) projection use. The advantage of the UHE bulb is its moderate price and the brightness does not decay almost 4000 hours before use. Due to low power consumption, it is customarily referred to as a cold light source. UHE bulb is an ideal light source widely used in mid-range projectors. The UHP bulb has the advantage of long service life, and can normally be used for more than 4000 hours, and the brightness attenuation is very small. UHP bulb is also an ideal cold light source, but because of its high price, it is generally used in overhead projector.
- Q:Is the projection bulb a cold light source, a light bulb or a high pressure mercury bulb?
- The cold light source is good, and the mercury lamp is unstable.
we have more than 60 employees,R&D 10 engineers work with more than 5 year experience in this filed, we can design the scheme for you based on your special requirements of your products within 20 days.Our products are suitable for various entertainment and recreation places
1. Manufacturer Overview
|Annual Output Value
||11.11% North America
11.11% South America
11.11% Eastern Europe
11.11% Southeast Asia
11.11% Mid East
11.11% Eastern Asia
11.11% Western Europe
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
||91% - 100%
|No.of Employees in Trade Department
||1,000-3,000 square meters
|No. of Production Lines
||OEM Service Offered Design Service Offered Buyer Label Offered
|Product Price Range