5W Efficiency Photovoltaic Chinese Solar Panels For Sale 5-200W

Ref Price:
Loading Port:
China main port
Payment Terms:
TT OR LC
Min Order Qty:
1000 watt
Supply Capability:
100000 watt/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Item specifice:

Material: Polycrystalline Silicon Max. Power(W): 200 Number of Cells(pieces): 1

Product Description:

5W Efficiency Photovoltaic Chinese Solar Panels For Sale 5-200W

5W Efficiency Photovoltaic Chinese Solar Panels For Sale 5-200W

5W Efficiency Photovoltaic Chinese Solar Panels For Sale 5-200W

5W Efficiency Photovoltaic Chinese Solar Panels For Sale 5-200W

Solar Module Introduction

Solar Module is the core part of solar PV power systems, also is the highest value part of it. The function of Solar Module is to convert the sun's radiation to electrical energy, or transfer it to battery and store in it, or to drive the load running.
The Product has been widely used in space and ground, it mainly used for power generation systems, charging systems, road lighting and traffic signs areas. It could offer
a wide range of power and voltage, and with high conversion efficiency, and long service life.

Solar modules use light energy (photons) from the sun to generate electricity through the photovoltaic effect. The majority of modules use wafer-based crystalline silicon cells or thin-film cells based on cadmium telluride or silicon. The structural (load carrying) member of a module can either be the top layer or the back layer. Cells must also be protected from mechanical damage and moisture. Most solar modules are rigid, but semi-flexible ones are available, based on thin-film cells. These early solar modules were first used in space in 1958.

Electrical connections are made in series to achieve a desired output voltage and/or in parallel to provide a desired current capability. The conducting wires that take the current off the modules may contain silver, copper or other non-magnetic conductive transition metals. The cells must be connected electrically to one another and to the rest of the system. Externally, popular terrestrial usage photovoltaic modules use MC3 (older) or MC4 connectors to facilitate easy weatherproof connections to the rest of the system.

 

Secification

 

Model Type

Peak Power-Pmax(W)

5-200W

Open Circuit Voltage-Voc(V)

44.2

Maximum Power Voltage-Vmp(V)

36

Short Circuit Current-Isc(A)

5.4

Maximum Power  Current-Imp(A) 

5

Maximum System Voltage

1000V DC

Maximum Series Fuse Rating

10A

Power Tolerance

 -1~+3%

Temperature Coefficients of Pmax

 -0.45%/℃

Temperature Coefficients of Voc

 -0.348%/℃

Temperature Coefficients of Isc

0.031%/℃

Nominal Operating Cell Temperature

44.5±2℃

Standard Testing Condition(STC)

Irradiance:1000W/m²;Temperature:25℃;AM=1.5

Qualification Test Parameters

Operating Temperature

 -40℃~+85℃

Storage Temperature

 -40℃~+85℃

Pressure Bearing

≥5400Pascal/m²

Wind Bearing

≥5400Pascal/m²

Mechanical Characteristics

Cell Size

Mono 125*125mm±0.5

No.of Cells

72pcs(6*12)

Dimension

1580*808*40mm

Weight

15.5Kg

Glass

3.2mm High Transmission,Low Iron

Frame

Anodized Aluminum Alloy

Junction Box

IP65Rated

Internal Diodes

3 Bypass Diodes

Cable

1*4.0mm² Length 900mm

 

Images
 
Packing & Shipping:

 

We have rich experience on how to pack the panels to make sure the safety on shipment when it arrives at the destination.

The normal size is packed by 25pcs/ carton / pallet. Paper carton for FCL shipping and wood carton for LCL shipping.

 

Warranty:

For c-Si panel: 25years output warranty for no less than 80% of performance, 10 years output warranty for no less than  90% of performance. Free from material and workmanship defects within 5 years.

For a-Si panel: 20 years output warranty for no less than 80% of performance, 10 years output warranty for no less than 90% of performance. Free from material and workmanship defects within 2 years.

FAQ:

1What price for each watt?

It depends on the quantity, delivery date and payment terms.

2What is your size for each module? Can you tell me the Parameter of your module?

We have different series of panels in different output, both c-Si and a-Si. Please take the specification sheet for your reference.

3Can you provide the peripheral products of the solar panels, such as the battery, controller, and inverter? If so, can you tell me how do they match each other?

Actually we are only manufacturer of solar panels, but we could try to source them for you in China if you need. We could provide you an optimal system design to instruct you how to install.

4Do you have the CE, TUV, UL Certification?

We’ve already passed all the tests, and any certificate is available.

5Have you ever sold your products to companies in my country?

Of course, we have customers in all general PV markets, but I think we should expand our market share along with the market growth.

6When did your company set up?  You are a new company, how can I believe your quality?

We entered into Solar PV industry in 2005, now we have several plants in manufacturing of a-Si and c-Si panels, and our capacity is 220MW per year. Till now we have already passed all the tests by authorized laboratories, e.g. TUV, VDE, UL.

7Can you help us install the module if we cooperate with you?

We haven’t entered into installation sector, but we have the plan in near future.

8) How do you pack your products?

We have rich experience on how to pack the panels to make sure the safety on shipment when it arrives at the destination.

 (9) Can you do OEM for us?

Yes, we can.

10Can we visit your factory?

Surely, I will arrange the trip basing on your business schedule.

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:Question about using solar panels?
If okorder.com and they ship across the US and Canada.
Q:Solar Panel energy 500 KW monthly?
here's the cost 50 KW-hr per day. Depending where you live, there is a chart showing the average expected amount of energy from a solar panel based on the panels peak rating. Lets use 5 hours as an average. This means you need 50 kw-hrs over 5 hours or 0 kw of peak performance. The cost to install a complete grid tied system is running from $6 to $9 per watt, depending on size and how your house sits. Typically, for a system this size, $7.5/watt or the total cost is $75,000. The federal government and some state on local government pays part of the cost. Your net cost will be $50,000. If you put $50,000 in a 0 year CD, you'd earn $250 per month in interest. On the average, a 500 kw-hr bill will run $225 per month. In my town it runs $50 and I'd need a larger system because I get less than 5 hours on average. So I'd earn $275 in interest. In CA, your electric bill would be $300.
Q:What does solar panel output refer to?
Power = work done/time taken In other words, Watts=Joules/second. In this respect, power is a little like speed (m/s). Your question is looking at a car with a 50mph top speed, and asking how long is it going that fast? The solar panel will produce .5KW for as long as you require it. Enough to boil a kettle, run a modest electric heater etc,
Q:can i make a solar panel out of aluminum foil?
You can't make a solar panel to generate any reasonable amount of electricity from that. You need a semiconductor to start with, in order to have something that can generate free charge carriers(electrons and holes) from photons. Then you need a junction which can separate the charges. In principle you could make a Shottky Diode solar cell from copper if you could find a doped semiconductor to bond a sheet of it to the copper. To form a decent electric field there should be a significant difference in work functions between the copper and the semiconductor, this will generally require the semiconductor to be doped. On top of this you would need a transparent conductor (most used are things like ITO or other 'TCOs' - Transparent Conducting Oxides) to be the top electrode to inject replacement charges into the semiconductor to replace the effect of recombination current. In summary, it's difficult to DIY. You generally need complicated machinery to get decent crystal growth and/or doping.
Q:Cost and energy generated by solar panel?
A little more than 0 watts per square foot, so that size panel would generate 250 watts under ideal conditions, which is noon on a sunny but not too hot day, near the equator. That's about /3 horsepower, or the same power as a man working hard. That is larger than needed to keep the battery of the car charged, unless you plan to run a laptop or something off it at night. The power is also too small to power the car for driving. If it's an electric car, you could get maybe another 2 miles per day out of the car, again, under ideal conditions. An RV store might have an idea of how much installation would cost. They would be accustomed to solar panels for RV's, but probably not small cars. A panel of that size would cost perhaps $500-800 just for the panel.
Q:how efficient are flexible solar panels?
One I got about 3 years ago is about 50% as efficient as a glass panel I got about 0 years ago. Not exactly a scientific study, I know.
Q:SOLAR Panels?
I'm in the California Foothills and the island of Mindanao... I have both solar panels (electric and water heating) and a single wind-generator since 2000. We actually sell power to PGE in California and are self-sufficient in Mindanao. NOW, I'm confused with YOUR math... you say the Rep. suggests a monthly savings of $35 (25% of $40) which would be $420 / year. If materials / installation are $8,000 less $2000 tax-credit: it would take 35 years to pay off $6,000 at $420 / year. 980 Kwh/ mo is some pretty heavy usage... I'd suggest trying to reduce that. CFT's, lowering your AC setting, no lights if NOT in room, un-plugging stand-by appliances, and upgrading insulation. At our 2000 sq ft California RANCH we only burn 400 Kwh per month, and that includes an 800 sq ft barn (admittedly we heat with a wood-stove). We have 5, Sanyo 200 watt panels (3kw total) and generate an avg 900 kwh / month. SO, we're selling BACK almost 500 kwh mo. to the grid on the photo-cells alone. The kw wind generator averages another 20 kwh / month. I THINK the company YOU are working with is selling the EXCESS electrical-power back to the power-company behind your back !! GOOD LUCK
Q:are there solar panel that work without the sun?
There cannot be a solar panel which works without sun light. But solar panels can work without sunlight. For example you would have seen the battery less calculators which work on solar power. they work in the night too with enough light coming from the bulbs in the room. So the answer to your question in yes. But for generating power we have to have a source which is free and we cannot put the panel in lighted area, which will make is not economical since the nett power obtained will be negative.
Q:where to face solar panels?
Not compass south, but solar south. It's easy to find. Google Find Solar south and you can get directions. Even better are trackers, that will let your panels track the sun all day.
Q:Solar panels for car fans?
You may not like it, but the answer's still the same. A car fan will draw anything from a few to several hundred watts, depending on which fan you're talking about (A/C, ventilation, cooling). A solar array will take up roughly one square meter to generate 00 Watts with the sun shining straight down onto it, so you'll need to cover (more or less) the entire roof (or hood) with solar cells in order to power that fan (minimum). If you still want to go ahead: Solar panels, Fuse, cables. Preferrably one cut-out diode per panel (in addition to the hopefully present internal diodes in the panels) in order to prevent one panle dumping its load into the next instead of into the fan. Much better option: get a low power fan (e.g a slow running computer fan) and connect it to that panel of yours. These fans make do with about 0 Watts (at a much lower air throughput), so you'll actually have a chance of running it from the solar panel without coverig your car in panels.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range