5 ton Wheel loader Construction Machinery
- Loading Port:
- Xiamen
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 PCS
- Supply Capability:
- 200 PCS/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
5ton Wheel loader Construction Machinery
Model | LT958 |
Operating weight | 17,100 kg |
Rated load | 5,000 kg |
Bucket capacity | 3 m³ |
Engine model | WEICHAI WD10G220E23 SHANGCHAI SC11CB220G2B1 CUMMINS 6CTA8.3-C215 |
Rated power | 162KW |
Rated rotate speed | 2000r/min |
Max. torque | ≥745.3N.m |
Breakout force | 145KN |
Driving speed | |
Forward Ⅰ | 0-11.5km/h |
Forward Ⅱ | 0-38km/h |
Reverse Ⅰ | 0-16km/h |
Grade ability | 28° |
Overall length | 7950mm |
Overall width | 2870mm |
Overall height | 3500mm |
Bucket width | 3000mm |
Wheel base | 3300mm |
Track base | 2260mm |
Min. ground clearance | 470mm |
Max. dumping height | 3300mm |
Max.dumping reach | 1400mm |
Hydraulic Torque converter | Single stage,4elements 单元四元件 |
Transmission | Planet-type 行星式 |
Raise time | ≤6.8s |
Total | ≤12.5s |
Tire type | 23.5-25 20PR |
Features and Advantages 2015 wheel loader forklift construction :
1).Competitive price:we manufacturer’s products are directly exported to buyers without the trading company in China
2).Exclusive Patent:6 proprietary technologies are applied in our loaders make them more fuel-efficient and safety, such as Auto Cooling Technology on brake system improve the safty.And the dust-proof layer make the axle more durable.
3).Details in Structure: Besides the special design of structure, full steel plate thickening, the thickness of lift arm and hinge plate reaches 60mm. Bigger hinge pin and hinge bearing raise the carrying capacity, machine more powerful. The exclusive dust-proof layer and sealed articulated points make the loader more durable.
4). Novel appearance and humanized design: cabin with broad view. Single(double)-handle pilot control system, electronic control gearshift to ensure easy operation and more comfortable.
5). Hydraulic systems: To adopt confluence of double pumps and equivalents unloading hydraulic systems, rational use of engine power, reduce energy consumption effectively. Independent transmission oil and hydraulic oil cooling improve the hydraulic system stability.
6).Optional accessories:There are some accessories could be chosen by users ,such as engine, transmission,floating forks ,marble slab carrier ,manure fork and grab ,bucket ,fixed platform etc.
Company Information
LTMA is committed to build quality assurance system. All the Products have been approved by the State Bureau of Technical Supervision,ISO 9001:2008, and CE certificate. 2006-2013 LTMA is assessed as the Model Enterprise and the Enterprise of Integrity in Xiamen City by the government. With 20000 ㎡ non-dust workshop, 13 years experience, CE certificated(some series),11 kilometers distance to Xiamen Port, this is how LTMA keep superior quality and competitive offers for global valued customers.
- Q:We are trying to build a front end loader for our tractor. How are the hydraulics hooked up? What size hoses, fittings, etc.
- use your old system and I take it you have the four plug system,all you need are the hoses to the ram on your loader to the hydraulics to and from 2 lines same as any thing else on your tractor normally all common size,you did not mention what kind of tractor
- Q:so i got some iso of newer games that i want to play but they dont work on disc loader on the hombrew channel. I made sure that they are the US version not european. When i click load game it goes to a blue screen with the word ERROR on it, and some other words too. I think it has to do because these are newer games (NHL 2K10) and i need to update the system (i havent updated in a very long time). so how do i update so i can play these games but still have the hombrew channel?
- Update to cIOS rev 14:
- Q:the priming chamber/bullet seater is stuck in the body i cant get it outalso if i do get it out i've never re-loaded i cant figure out how to measure the powder its just one size measure how do i do all the different powder charges?i pretty much know nothing about it i did read the instructions though
- Been there done that. Ok i have had the primer seater rod get stuck too. You need to take a small hack saw cut the top of the shell casing at an angle then use a pair of pliers and un peel the shell from the rod. NO biggie it happens. Ok your using the lee loader so it comes with the dipper however your limited to what the load chart is for your specific bullet. You can not change the load at all unless you go out and get a full set of dippers and or a powder scale. Sounds like your just getting into reloading. the lee loader is a great little tool that works very well. something that can help. When you go to put in another primer put a light coat of baby powder on the rod. you might even want to go over the rod with a piece of emery cloth any nick in it can cause a case to get stuck on it. Now the two biggest things i would recommend you purchase is. Lee's modern reloading second edition book. There is a lot more data that can help you out. Good part is they show specific loads for using dippers. Also lee sells a full set of dippers with a chart that will show you how many grains each dipper can hold per different types of powders
- Q:need to know how wide + and how deep a front loader washer is
- most front load washers are about 27-30 inches wide and fro 32-36 inches deep they vary depending on cubic ft.
- Q:any1 know any good sites for game iso files for wii flow or usb loader
- Wii Games Iso Download
- Q:we have one
- You are obviously not using the machine properly. We have no such problems with our towels. There are number of things that can cause this. - overloading - too much detergent - wrong detergent - too low a spin speed. - water supply (hard water) - fabric softener compartment is being overfilled and is dumping the fabric softener on the WASH CYCLE.
- Q:What does the dual pump combination on the loader mean?
- Double pump refers to the hydraulic pump and steering pump, when no steering action, two pumps through the mixing valve [also called priority valve] simultaneously supply oil to the multi valve, increase the supply of working device, improve work efficiency. When turning, give priority to steering gear.
- Q:what frount end loaders fit on the ford 1210 tractor?
- Ford 1210 Loader
- Q:can you install the just ipod linux loader for an ipod if you just have rockbox and the original apple os on your ipod video 30GB. this way you can choose instead of using thew hold switch method.
- the different poster is right. apple does no longer desire you to so which you may obey. they are the nazis of the laptop worldwide. you do no longer very own what you do no longer administration. apple controls it, so they very own it, you do no longer. I recommend to get rid of any and all apple products (i do no longer capitalize apple through fact i'm an apple hater). that's the reason: a million. Jobs became residing in a mansion mutually as his daughter became residing on welfare. 2. Jobs chased away the genius and the certainly maker of apple I and II Wozniak
- Q:POLL: Are you a go-getter; a free-loader; or an excuse-maker? Neither?
- Part-time go getter; full-time excuse-maker.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
5 ton Wheel loader Construction Machinery
- Loading Port:
- Xiamen
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 PCS
- Supply Capability:
- 200 PCS/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords