Q:Network monitoring camera how to change ip

In IE, enter the IP address of the network camera, enter. After entering the user name and password, open "Network Settings". Enter the change IP address and click "Settings".

Q:What is the difference between a camera and a monitor?

Camera digital camera The wide range of cameras, the basic principles of its work are the same: the optical image signal into electrical signals, in order to facilitate storage or transmission. When we shoot an object, the light reflected on the object is collected by the camera lens, focusing it on the light receiving surface of the camera (such as the target surface of the camera tube), and then through the imaging device to light into electricity, that is, "Video signal". Photoelectric signal is very weak, need to be pre-amplifier circuit to enlarge, and then through a variety of circuits for processing and adjustment, the final standard signal can be sent to the recorder and other recording media recorded, or spread through the transmission system or sent to the monitor display.

Q:3.6mm and 6mm surveillance camera can see the screen angle is how much

This depends on how much the face of the CCD friends, 1/3 is 71 degrees 1/4 is more than 51 degrees

Q:Monitor camera parameters how to see the bigger the bigger the better?

The more the focal length, the more able to shoot distant objects, but the smaller the perspective, so depends on your specific needs, if you need a large range, you have to choose a small focal length, if you need to shoot distant, then select Focal length.

Q:What is the difference between monitoring the camera and the usual?

3. Camera effect: monitoring with the camera, generally require high clarity, because the current computer camera commonly used sensor chip is Micron or modern photographic chip, these two kinds of chip camera, clarity are similar, if the use of 5 glass Lens, then the requirements are less stringent occasions are generally able to meet the basic requirements, and 30 frames per second speed is basically able to meet the monitoring needs. If you need better clarity, you can use the physical dynamic 1.3 million camera (not online nonsense 1.3 million, need to emphasize that the sensor chip and interface chip support physical dynamic 1.3 million camera, can really be considered 1.3 million ), This camera is generally better imaging results than the use of magnesium light and modern sensor chip camera, can get better than the average physical 350,000 camera effect, but the bandwidth occupied and CPU occupancy rate is very high. So easy to monitor the camera system easy to use.

Q:Monitor the camera in the monitor screen appears in the camera 001 what meaning

One is the camera's own image on the name, you must enter the camera's menu, delete the name.

Q:Monitoring camera POE power supply is good, or centralized power supply good?

If you have to use (see profits, you understand), it is recommended to choose some big brands of products, such as Huawei, 3com, etc., the cost is high, 20 meters if the use of oxygen-free copper feet .5 super five twisted pair , The loss on the wire can be ignored, but the use of POE power supply to consider the lightning ah, a break is a big string ah! :) POE to be used to do lightning protection measures Oh. And POE power supply in the event of failure when the investigation than the use of some trouble with the transformer.

Q:3 megapixel surveillance cameras store much day

3600 seconds (per hour) * 24 hours (per day) * Rate (128kbps-8Mbps) / 8 (conversion of bytes and bits) / 1024 (converted to M) / 1024 (converted to G) ≈42G (bit rate is 4Mbps)

Q:How to use video surveillance video surveillance

Whether it is Hai Kang, Dahua, Degas or Kang silver video capture card, their function is video capture, and then? Compression, otherwise, so much of the data stream burned the CPU, they are only responsible for the collection, that is, you can now achieve the function - video. To achieve the function you say is also very simple, according to your idea, have to buy a video decoder card, because the acquisition card data collected after compression can not communicate with the qq software (protocol is different), through the decoder card , The compressed data is reduced to analog (or digital) signal, through the USB interface can achieve what you said the function.

Q:What is the difference between a wireless surveillance camera and a cable surveillance camera?

Wired relative to the wireless signal a little better, the wireless a little easier, the quality of a clear choice of cable is better.