45g/m2, 9*9/inch fiberglass mesh
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specifications of Fiberglass Mesh 45g 2.5*2.5mm
Coated Alkali-resistant fiberglass mesh cloth is based on C-glass or E-glass woven cloth and treated by alkali-resistance copolymer resin on the surface.
The woven cloth is made of fiberglass yarn or roving by means of leno or plain weave.
Usage/Applications of Fiberglass Mesh 45g 2.5*2.5mm
1.External Thermo Insulating Composite System (ETICS) & External Insulating Finish System (EIFS)
2.External and internal plaster reinforcement
3.Electrical heating mats
4.Marble Slab Reinforcement / Mosaic Carrier
5.Asphalt reinforcement (roof water-proof)
6.Reinforced lightweight construction boards
- Q:Does the new house wall need to paste mesh?
- Pasting mesh is based on your walls, if the wall cracking too much, it is recommendated to paste mesh in the whole wall; if it is less, you just need to paste at the cracking place.
- Q:Glass fiber gridding cloth is easy to be broken after being glued.
- The glue matters or the baking process matters.
- Q:As for the latitudinal tension and longitudinal tension of alkali resistant glass fiber gridding cloth, which is larger?
- Longitudinal woven technique often refers to cross woven technique. Secondly, latitudinal yarn is thick yarn. The strength of longitudinal yarn is greater than the latitudinal yarn: currently weaving mill uses pre-rolling longitudinal beam. Moreover, the longitudinal yarn often is joint yarn, so the longitudinal tension is larger and the strength is greater than that of plain weaving.
- Q:Mesh cloth and Dacron cloth, which one is better?
- I think Dacron is better. If it is light wall, and if allowed, you can also use wallpaper to cover the spots.
- Q:Mesh cloth tape, that is, fiberglass self-adhesive tape, how to use?
- Glass fiber mesh fabric is based on glass fiber woven fabric as its base material and is coated with high polymer emulsion. Therefore, the utility model has the advantages of good alkali resistance, flexibility, and high tensile resistance at warp and weft direction. The utility model can be widely used for heat preservation, water resistance and crack resistance of walls inside and outside buildings.
- Q:Function of fiber net in building plastering
- Two kinds of hanging wire, a wall insulation, a construction process, because the majority of the high-rise hollow block, concrete hollow block and the expansion coefficients are not the same, easy to crack, resulting in external wall seepage and influence appearance, generally does not require full hanging, hanging parts: requirements the horizontal hanging wire mesh - the need to consider the block wall and concrete beams intersect, masonry walls and concrete columns (wall) intersection, block and beam gable intersect
- Q:Can wall bricks be pasted on the indoor glass fiber gridding cloth?
- Yes. Glass fiber gridding cloth is used for roofing waterproofing and wall or board reinforcement such as gypsum and mosaics.
- Q:What is the difference between carbon fiber and glass fiber
- Carbon fiber is a carbon fiber woven into the network, and then form the material integration polgolefin the board, or what is the shell, glass fiber polymer type fiber, carbon fiber has the advantages of high strength high hardness, disadvantage is the need to pay attention to be conductive, also some expensive glass, cheap, non conducting. Strength is enough
- Q:Are fiberglass tubes harmful to people's health?
- But it doesn't break down in the body. Using it to wipe pot after rinse thoroughly with no problems, otherwise easy to enter into the body of silica residue appendix, smaller particles may cause inflammation, stomach retention in the digestive tract, it is difficult to down, and damage to the digestive tract mucosa.
- Q:What is the construction method of external wall thermal insulation mesh
- 1, It needs specially-assigned person to compound the polymer mortar in order to ensure the quality of stirring. 2, open the bung by contrarotate, and then remix the adhesive with a stirrer or other tools to prevent the parting phenomenon of binder, you should stir moderately, so as not to render quality problems. 3, polymer mortar mix ratio: KL Binder: 425# sulphate aluminium cement: Sand (with a 18 mesh screen): 1: 1.88: 3.25 (weight ratio). 4, After cement and sand are measured by the bucket, pour into iron gray groove, and then mix evenly. And pour into binder in mix proportion, stirring evenly into gruel to prevent dissociation. It can appropriately add water due to the workability. 5, water is the concrete water. 6, polymer mortar should be used with the distribution, the deployed polymer mortar preferably is better to run out within one hour. Polymer mortar should be placed in a cool place to avoid sun exposure.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
45g/m2, 9*9/inch fiberglass mesh
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords