3m³ Concrete truck mixer / ISO & CE certificate
- Ref Price:
-
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 PCS
- Supply Capability:
- 8 PCS/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
3m³ Concrete truck mixer / ISO & CE certificate
Hydraulic system
•The split hydraulic system features low cost and easy maintenance;
•The best hydraulic system assembly in the world.
•The company has good relationship with leading hydraulic system manufacturers. The hydraulic system is the most reliable, featuring compact structure and easy maintenance.
•The hydraulic pump suspension frame adopts U type bolt fixing, featuring good interchangeability and easy maintenance; It adopts Sauer hydraulic oil pump, motor and reducer.
Water supply system
•Large water tank capacity; One-time water using cycle is long;
•Pneumatic type water supply; Washing system, high water supply pressure, clean the feeding hopper and, discharging slot, tank and other equipment;
•One switch on the bottom of the cleaning system, which can discharge the water completely in winter.
•The water pump and shower nozzle are arranged reasonably, which are easy to operate.
Operation system
•It adopts the control method of mechanical linkage, and optimize the traditional operation structure, which is easier and more reliable for the operator.
•The cab adds the internal operation handle, which is easy for operation without getting off.
•Control the mixing and discharging speed by the throttle, and load (acceleration) and unload (acceleration) the material.
•Optimize the operation reliability, and eliminate the safety loophole.
Feeding and discharging system
•Add the quick coupler for watering, and the optimized hopper is easy to feed and discharge the concrete;
•The feeding height of less than 3850mm is suitable for the mixer, and the upper of feeding hopper is less than 650mm;
•The discharging height of 1350mm-1550mm is suitable for the feeding inlet of the pump;
Upper electrical system
•The electrical system is in single line, with negative pole on iron. The line voltage is 24V.
•The electrical system consists of illuminator, hydraulic oil temperature control switch, relay, and fan motor. When the oil temperature is over 60°C, the temperature control switch will connect and the cooling fan will rotate; when the oil temperature is below 55°C, the temperature control switch will disconnect and the cooling fan will stop.
•The work lamp switch controls the work lamp.
- Q:How many years does the concrete agitator truck go away?
- Usually use life for 8 to 10 years, but there is no special provision for discarded concrete transporter, is generally in accordance with the provisions of other vehicles in the motor vehicle standards: use fixed number of year for 10 years, can carry out the delay to 4 years. Because of concrete transport vehicle is a special vehicle, this is generally will have certain preferential treatment for scrap.
- Q:Does it affect the ease of mixing too long?
- Are now using concrete products, easy to control the quality, intensity can be measured, can also add additive, etc., only their own building the in-situ mixing, transportation for a long time will affect the workability, so the project will adopt water mud and water reducing agent, etc.
- Q:What can be done to remove the concrete from the concrete mixer truck
- It consists mainly of agitator and auxiliary supporting parts. Mixing drum of concrete loading container, it is made from high quality wear-resistant steel sheet, in order to be able to automatic loading and unloading of concrete, the lining welding spiral blade with special shape. When the concrete moves in the direction of the blades, it is mixed and stirred in the process of increasing and turning. In the process of feeding and transportation, the mixing cylinder is turning, the concrete is moving in the blade, and the mixing cylinder is turned and the concrete is removed out of the blade. The rotation of the mixer is guaranteed by the hydraulic actuator. The load is 3-6 cubic meters. Of commonly used concrete mixer truck passed by the car engine power output shaft to drive hydraulic pump, and driven by hydraulic motor with high pressure oil push the mixing barrel, loading capacity for 9 ~ 12 cubic are driven by automotive auxiliary diesel engine driven hydraulic pump hydraulic motor. The blades are the main parts of the mixing plant, and the damage or severe wear and tear can cause the concrete to be mixed. In addition, if the design is unreasonable, the concrete will be isolated.
- Q:How did the concrete agitate the concrete
- When pouring into the mixing building, the two sides of the car are equal to the stirring bracket, and the first time the mouth is made a mark, so that the next time it will be successful!
- Q:s the collapse of four concrete mixer trucks
- The caving degree is 4 cannot be transported by concrete mixer, the slump is put into and out of the tank car. The average slump is 100 to 120mm, and it is better not to transport the concrete transporter, preferably with a construction dump truck.
- Q:What are the three main parts of the concrete mixer car
- The speed reducer, the pump radiator, is to make the mixing tank turn
- Q:What is the car for concrete
- Concrete cars are called concrete mixers (concrete cars), which are used for transporting concrete concrete trucks for construction purposes. Because of its appearance, it is also commonly referred to as the tian.
- Q:What is the difference between a concrete mixer and a tanker?
- A special truck used to transport construction concrete; Because of its appearance, it is also commonly referred to as the tian. These trucks are equipped with cylindrical agitating cylinders to carry mixed concrete. By the automobile chassis, mixing barrel, transmission system, water supply equipment, take full power and power, before and after the mixing drum support, deceleration machine, hydraulic transmission system, material in and out of the system, operating mechanism and other parts. Due to the technical bottleneck, the domestic mixer can be made from 3m to 8m cubic meters, and the four large parts of the volume are imported. Composition: type 2 chassis, drive system, hydraulic system, frame, mixing tank, feeding system, water supply system, operating system, ladder and so on. The top of the mixing tank is mounted on the rack, and the rear end is supported by two supporting wheels mounted behind the chassis.
- Q:How does the concrete mixing truck work?
- Working principle is that by taking power device to take out car chassis power, and drive hydraulic system of the variable pump, the mechanical energy into hydraulic energy to quantitative motor, motor and drive reducer, driven by speed reducer mixing plant, for mixing concrete
- Q:Is a tanker and a mixer a thing
- Usually a concrete mixer is called a tanker But the tanker also has a concrete factory that transports the bulk cement, and USES the long can to drag the engine
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
3m³ Concrete truck mixer / ISO & CE certificate
- Ref Price:
-
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 PCS
- Supply Capability:
- 8 PCS/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords
