Detailed Product Description
1.Edison or Luxeon K2 high power led chip
2.Energy saving and super luminance
3.Infinite RGBW color system
LED Moving Head Light-36
Input voltage: AC 90V-260V/50-60Hz
Power consumption: 180W
LEDs: 36 pcs 10W EDISON LEDs R: 10, G: 8, B: 8, W: 10
Control mode: DMX-512control mode; auto-run; sound active
DMX control channel 12CH
Carton size: 460×335×85mm(1pcs/carton)
CH5 X axis
CH7 X / Y Speed
CH11 X-axis fine-tuning
CH12 Y-axis fine-tuning
- Q:Why do some projection lights go on and not immediately?
- The metal halide lamp work, if off immediately opened it takes a few minutes to light up, this is normal, because the temperature of the inner liner is light metal halide lamp is very high, this time off to re open it, inside the high pressure
- Q:How to distinguish the true and false of projection light bulb?
- 3, check the cup mouth glue, authentic bulbs use authentic recipe, with matte glue, suffused with soft luster. This glue, this one does not have a semicolon, so no matter how imitation can not be exactly the same, careful comparison will be able to see the color difference, color difference is obvious.4, check the two cup wall, will find the fake wall with the reddish color and luster, no lubrication minor scratches, and genuine luster fine white wall. This is because the projector lamp what can be replaced, but can not because the cup, cup production process is complex, and the mold superb production process, in addition to the original factory who can't fake imitation, but also the transformation based on the original old lamp on. The used cup wall can not avoid the red eye, as long as it can let him enough, appeared fake.
- Q:What is a projection lamp?
- Item name: projection lamp product model: projection lampDetailed descriptionProduct Description: FeaturesThe utility model relates to a double light lens xenon projection lamp, which adopts a new type of automobile lamp matched with the imaging principle of an elliptical reflector and a convex lens, and is used for switching to the near light and high beam through an electromagnetic booster.Safe and reliable in performance, novel in shape, beautifully decorated with angel eyes. Make your headlights more dazzling and cooler!Hi-low xenon project light is a new mode headlight which combine oval reflector with convex imaging theory, it can be switched the Hi and low light by the electromagnetic drive. Safe and reliable features, novel appearance matching with the exquisite angel eyes decoration, make your headlight more shining and cool.The shadow, the cut-off line is clearly visible. Have good light distribution according to laws and regulations, which will not cause glare to vehicles or pedestrians.The, low, beam, clear, the, light, and, shadow, with, obvious, dividing, line, What, is, the, legal, excellent, light, shape, parts, and, will,, be, soft, distinguishes, to, vehicle, passerby., andThere is a concentration of high beam shadow, let the driver more brightness and further irradiation.In, the, middle, of, beam, shadow, There, is, a, focus, block, which, can, high, make, more,, brightness, and, further, irradiation.
- Q:Can translucent light screen be used as projection cloth?
- The projection lamp is a new type of advertising advertising products a high efficiency of fashion, the usual thinking break people's creative advertising. Arouse people's curiosity. Make your best to achieve the best publicity publicity.GOBO projection lamp.
- Q:Why is the projector still bright after the Harvard H6 sports car locks?
- It has a delay and lights itself out. 4S shop professional technicians, 10 minutes to solve. ]
- Q:How do you do routine maintenance of projection bulb?
- Prevent repeated movementIn the projection process, we will definitely encounter the condition of adjusting the projection azimuth. At this time, many people will adopt the direct movement method to adjust to the appropriate position. But what we're going to tell us here is that it wasWhen the light bulb is in use, the temperature will be very high. At the moment, the filament inside the bulb is usually operated in semi molten condition. If the projection is moving frequently at this time, it will probably harm the projection bulb. Thus advocated,If it is placed in the projection, when we use the two or three best can be placed in position to determine the projection, such as non special conditions, we must prevent the move, so every time not only easy to use, but also reduce the direct harm to the projection.The projection bulb replacement / installation method is very elegantWhen the projection lamp needs replacement, we should immediately check the projector containing instructions, ensure the protection and replacement steps accurately; at the same time, buy the bulb, we also recognize that what the common type and the projector bulb can compatible, which is not compatible, if the selected fault type and may burn lighting, projection the lamp and projector.All objects on so precious, we usually use the best care treatment, carefully protected, it means only a maximum limit, extending life saving bulbs.
- Q:How to change the light projection lamp
- Introduction - using a design template to build a presentation, the author follows how to use the design template to establish a presentation for the term paper as an example to introduce the practical application of PowerPoint. 1. create a new presentation, select the design template, and click ok". At this point, we'll see the new presentation dialog box and switch to the presentation". Then select "topic speech" from the "show" tab (prompt: preview will appear in the right box of the dialog box), click the OK button (Figure 2). At this point, a beautiful slide prototype has unfolded before our eyes. 2. text entry in Figure 2 slide view, click the text of any position to modify the light frame around the twill frame will be replaced by a wide, with a flashing cursor prompt in the box, said this can enter text. Then we need to modify the text, the font, font size and color, etc., are provided by the template default values, if not satisfied with the mouse box, select the text to be modified, and then select the font, size and color can be. To add text outside a placeholder, click Insert, and select the horizontal or vertical in the text box. If we want to modify the list of items in the slide (which appear as text, with a small dot on the left), such as adding or reducing items, it's simple. Only in the slide view, click the item text in any position to be modified, and then in the project you want to add a row of position and press the Enter key, there will be a new project bulleted text symbols, if the length exceeds a line, PowerPoint 2000 will make its wordwrapping and align. If you want to delete the project, simply delete all of the text in the project. Thus, the first slide will be generated, and then we will modify the following slides in the same way. When you're done, just click the file menu, select save, and save the demos you've already done.
- Q:How to scientifically maintain the light bulb of projection lamp and prolong the service life?
- Two 、 frequent switching machineSome users said, then we save the use of it, can take 10 minutes to earn 10 minutes. Campus users, in particular, switch the overhead projector once every class, which is a danger. Over time, the projector bulb was prematurely worn out. "Frequent switching machine" is the second killer.Three dust influenceAs we all know, dust or fume stuck to the light bulb, drop light power, how will affect life? Because the projection lamp operation, wick temperature exceed 1 thousand degrees Celsius (250W), the heat dissipation requirements are very strict, will form a local adhesion of dust wick heat bad, from the beginning of the vicious spiral, premature the damage lost, even direct attack "blow lamp". I hope Zhengzhou Le Di photoelectric can help you!
- Q:What is a projection light? What's the use?
- The projection lamp is a use of light on the screen or wall lamp for projection screen, and movie similar principle; he can in the wall, ground projection pattern you want to do advertising, decoration, warning etc.
- Q:What about "replacing the projector lights and cleaning the screen" on the screen?
- That means that the aging of the projection lamp, or the screen is too dirty and the effect is not good, automatic detection ah, you can clean it again and again, but it is best to find a professional master yo,
We are a professional enterprise integrating product design and manufacturing.
Our commitment with quality: we have been built detection system running through the whole process.Sales service:
1. Establish strong product show media and sales service network system.
2. Inherit professional careless service culture.
3. Build personality, under clients' order service platform.
4. Without any trouble on whole sales service.
5. Share "one step" style VIP service personality.
1. Manufacturer Overview
||Guangzhou, Guangdong, China (Mainland)
|Annual Output Value
||Above US$100 Million
||North America; South America; Eastern Europe; Southeast Asia; Africa; Oceania; Mid East; Eastern Asia; Western Europe; Central America; Northern Europe; Southern Europe; South Asia; Domestic Market
||Light engine CE certificate; Pool light CE certificate
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
||81% - 90%
|No.of Employees in Trade Department
||1,000-3,000 square meters
|No. of Production Lines
||OEM Service Offered Design Service Offered Buyer Label Offered
|Product Price Range
||Low and/or Average