33018 Tapered Roller Bearigs Single Row Bearing

Ref Price:
Loading Port:
Qingdao
Payment Terms:
TT OR LC
Min Order Qty:
1000 pc
Supply Capability:
500000 pc/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

Specificatioin of Taperder Roller Bearings:



The tapered roller bearing is to bear the combination of radial and axial load but mainly afford radial load. The loading capibility is determined by the raceway angle of outer  ring, the larger angle afford larger load. This kind of bearings can be  seperated and it can be divided into single-row and double-row tapered roller  bearings by the number of columns. The clearance for single-row tapered roller  bearing should be adjusted by the customers when installation. For the  double-row tapered roller bearings,the clearance has already set by the  manufacture before ex-factory. Tapered roller bearing has taper shaped inner  ring and outer ring raceway,and the roller elements arrange between them. All  projection lines from the surface of rollers meet at the same point on bearing  axis. This design makes tapered roller bearings particular suitable for combined  (axial and radial) loads.The axial loading capacity is determined by the  contacting angle α, the bigger angle for α, the larger axial loading capacity  is. Tapered roller bearing is usually a seperated bearing, that is,the inner  ring assembly including roller and cages, is seperated installed with the cup.

Taper roller bearings are mainly used for radial and axial joint load with radial load as main subject. Axial load capacity relies on raceway angle of outer ring: the bigger the angle is, the bigger the bearing capacity is. Outer ring can be separated and can be easily assembled. During installing and using process, axial clearance and radial clearance and radial clearance can be adjusted and pre-interference installation can be allowed. 


            


Product application:

In many applications tapered roller bearings are used in back-to-back pairs so that axial forces can be supported equally in either direction.


- car and vehicle wheel

- mining equipment

- moderate speed

- engine motors

- axle systems    

- construction

- agriculture

- reducers

- gear box



Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:What are the conditions for the normal and reverse loading of tapered roller bearings?
2. anti loaded (outer ring width relative end) horns contact ball bearing or tapered roller bearing pressure center distance is greater than two at the midpoint of the bearing span, known as anti loading, obviously, axial thermal expansion will increase the axial clearance of bearing. In addition, the structure of reverse loading is more complicated, and it is inconvenient to assemble, disassemble and adjust.Stiffness analysis of positive and negative when the transmission parts of cantilever installation, shaft reverse mounting stiffness ratio of forward shafting high, this is because the distance from the center of pressure bearing with large, maximum bending moment of the bearing force, deformation and axial deformation and are less formal.
Q:Taper roller bearing limit speed 20
First of all, different types of tapered roller bearings, the limit speed is different. Bearing on catalog.Second, the calculation of bearing limit speed is calculated by computer simulation of bearing manufacturer. It is very complicated. Mainly based on frictional heat generation and cage strength limit.
Q:Tapered roller bearings, 70 in diameter, please tell me the model number
What about outside diameter (D) and width (B)? You didn't say?.Following are all series of codes and sizes for tapered roller bearings (single column and double row). I hope they can help.Single row tapered roller bearings (taken from GB/T 297-1994)Bearing code |30000: 32914 X2Basic size /mm|d: 70Basic dimensions /mm| D: 100Basic size /mm|T: 20Basic size /mm|B: 19Basic size /mm|C: 16Installation size /mm|da (min):-Installation size /mm|db (max):-Installation dimension /mm| Da (min):-Installation size /mm|Da (max):-Installation size /mm|Db (min):-Installation size /mm|a1 (min): 4Installation size /mm|a2 (min): 6Installation size /mm|ra (max): 1Installation size /mm|rb (max): 1The other is /mm|a size: 19Other sizes /mm|r (min): 1Other sizes /mm|r1 (min): 1The calculated coefficient is |e: 0.33The calculated coefficient is |Y: 1.8The calculated coefficient is |Y0: 1Basic rated load /kN|Cr: 53.2Basic rated load /kN|C0r: 85.5The speed limit / (r/min) | fat: 3600The speed limit / (r/min) | oil: 4500The weight is /kg|W:-
Q:Small problems of roller bearings of tapered roller bearings
Tapered roller bearing roller must have certain taper roller and raceway, inside and outside the vertebral vertebral vertex vertex must be of the same point and in the shaft center line (similar to bevel), or when the roller bearing motion reducer and raceway for angular velocity, linear velocity will be the same for different sliding friction and rolling bearing becomes sliding bearing.
Q:Reasons for the damage of tapered roller bearings used on motors - -
But it is worth noting that you must control your parts tolerances, affect the tolerance of your variables clearance values are 11, 1 respectively -- bearing outer ring end face of large tolerances; 1 large end bearing inner ring outer ring end face 2 large tolerances; tolerances of bearings; 2 large end face of the inner face of tolerance between the two bearings, bearing; the small ring thickness tolerances; spacer ring tolerances; axial length tolerances; and two bearing diameter tolerances, and the corresponding axis tolerances (same axis but not at the same time processing is considered as two independent variables), consider the last four variables is because of you this application should be tightly matched with the inner ring, it will affect the clearance.
Q:How does the roller of tapered roller bearings fit in?
Tapered roller bearings itself can be broken down, and new (or old) bearings are cleaned and decomposed. So do not worry, carefully installed in accordance with the original installation order on the line, and if it does not meet the installation order, the installation of this bearing is not go on.
Q:Tapered roller bearings 32010x, two matching, how to install?
The design of this kind of bearings makes the inner ring raceway, outer raceway and the top of each cone face intersect the point of the central line of the roller. In addition to metric series products, there are a variety of English series products.
Q:What does "tapered roller bearing" suffix "A" mean?
Tapered roller bearing suffix AA - angular contact ball bearings with a contact angle of 30 degreesA5 - angular contact ball bearings with a contact angle of 25 degrees
Q:Method or tool for measuring clearance of tapered roller bearings.
You can measure the oil gap with a drop bar, that is, a soft drop ruler, which can be purchased without measuring the instrument of the bearing
Q:There is a slot in the inner ring of tapered roller bearings, right? Is the roller in the slot?
Yes.AskIs there a gap between the roller and the slot when the roller is placed in the slot?Chasing the answerNo

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range