31305 Tapered Roller Bearigs Single Row Bearing

Ref Price:
Loading Port:
Qingdao
Payment Terms:
TT OR LC
Min Order Qty:
1000 pc
Supply Capability:
500000 pc/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

Specificatioin of Taperder Roller Bearings:



The tapered roller bearing is to bear the combination of radial and axial load but mainly afford radial load. The loading capibility is determined by the raceway angle of outer  ring, the larger angle afford larger load. This kind of bearings can be  seperated and it can be divided into single-row and double-row tapered roller  bearings by the number of columns. The clearance for single-row tapered roller  bearing should be adjusted by the customers when installation. For the  double-row tapered roller bearings,the clearance has already set by the  manufacture before ex-factory. Tapered roller bearing has taper shaped inner  ring and outer ring raceway,and the roller elements arrange between them. All  projection lines from the surface of rollers meet at the same point on bearing  axis. This design makes tapered roller bearings particular suitable for combined  (axial and radial) loads.The axial loading capacity is determined by the  contacting angle α, the bigger angle for α, the larger axial loading capacity  is. Tapered roller bearing is usually a seperated bearing, that is,the inner  ring assembly including roller and cages, is seperated installed with the cup.



Taper roller bearings are mainly used for radial and axial joint load with radial load as main subject. Axial load capacity relies on raceway angle of outer ring: the bigger the angle is, the bigger the bearing capacity is. Outer ring can be separated and can be easily assembled. During installing and using process, axial clearance and radial clearance and radial clearance can be adjusted and pre-interference installation can be allowed. 


            


Product application:

In many applications tapered roller bearings are used in back-to-back pairs so that axial forces can be supported equally in either direction.


- car and vehicle wheel

- mining equipment

- moderate speed

- engine motors

- axle systems    

- construction

- agriculture

- reducers

- gear box



Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:There is a slot in the inner ring of tapered roller bearings, right? Is the roller in the slot?
There is a slot in the cone... The ball is placed in the slot. Handan, north, LiAskIs there a gap between the roller and the slot?Can I move axially?Chasing the answerThere is a certain clearance between them. It is not very large. It is caused by the force...
Q:Tapered roller bearing suffix code YA2 stands for what does that mean?
Mr. Liu five love reading, "gladly forget to eat" every knowing; ong drinking is not wine, but for mountains and rivers ". So Mr. Qian Zhongshu proposed" all happiness enjoy all belong to the spirit of "the world as truth, but think, feel spiritual satisfaction is also flawed, sometimes even the feeble.
Q:How to judge the positive and negative sides of the tapered roller bearings,
The installation of tapered roller bearings is not only to pay attention to the direction of installation, there are many other places to pay attention to, is a very professional technical activities
Q:What is the size of tapered roller bearings 352214?
Bearing type: tapered roller bearingNew model: 352214Old model: 97514EInternal diameter (mm):70Outside diameter (mm):125Width (mm):75
Q:What are the conditions for the normal and reverse loading of tapered roller bearings?
2. anti loaded (outer ring width relative end) horns contact ball bearing or tapered roller bearing pressure center distance is greater than two at the midpoint of the bearing span, known as anti loading, obviously, axial thermal expansion will increase the axial clearance of bearing. In addition, the structure of reverse loading is more complicated, and it is inconvenient to assemble, disassemble and adjust.Stiffness analysis of positive and negative when the transmission parts of cantilever installation, shaft reverse mounting stiffness ratio of forward shafting high, this is because the distance from the center of pressure bearing with large, maximum bending moment of the bearing force, deformation and axial deformation and are less formal.
Q:The installation of tapered roller bearings
1, for example, a shaft needs to be fitted with two such bearings at both ends. Can it be installed in the same direction?The force of the shaft is concerned. If the shaft is indeed subjected to one-way axial force, of course, it can be installed in the same direction. If it is subjected to biaxial axial force, it will not work
Q:Tapered roller bearings, 70 in diameter, please tell me the model number
What about outside diameter (D) and width (B)? You didn't say?.Following are all series of codes and sizes for tapered roller bearings (single column and double row). I hope they can help.Single row tapered roller bearings (taken from GB/T 297-1994)Bearing code |30000: 32914 X2Basic size /mm|d: 70Basic dimensions /mm| D: 100Basic size /mm|T: 20Basic size /mm|B: 19Basic size /mm|C: 16Installation size /mm|da (min):-Installation size /mm|db (max):-Installation dimension /mm| Da (min):-Installation size /mm|Da (max):-Installation size /mm|Db (min):-Installation size /mm|a1 (min): 4Installation size /mm|a2 (min): 6Installation size /mm|ra (max): 1Installation size /mm|rb (max): 1The other is /mm|a size: 19Other sizes /mm|r (min): 1Other sizes /mm|r1 (min): 1The calculated coefficient is |e: 0.33The calculated coefficient is |Y: 1.8The calculated coefficient is |Y0: 1Basic rated load /kN|Cr: 53.2Basic rated load /kN|C0r: 85.5The speed limit / (r/min) | fat: 3600The speed limit / (r/min) | oil: 4500The weight is /kg|W:-
Q:Method or tool for measuring clearance of tapered roller bearings.
This should be accomplished by tightening the clearance of the gear box end cover.
Q:How does the roller of tapered roller bearings fit in?
Tapered roller bearings are made up of outer rings, inner rings, rollers, and cages. The outer ring is a single body, and the inner ring, roller and cage are assembled together. They are called inner components. Tapered roller bearings belong to separable bearings, and when installed, the two components (inner and outer rings) can be fitted together.
Q:Tapered roller bearings 32010x, two matching, how to install?
Suitable for heavy load and impact load. In addition to single row bearings, tapered roller bearings include double row bearings, pairs of double bearings and four row bearings. The taper roller bearing holder usually adopts a punch holder.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range