3 Tons Diesel Powered Forklift product CPCD39FR

Ref Price:
$5,000.00 - 8,000.00 / unit
Loading Port:
Shanghai
Payment Terms:
TT or LC
Min Order Qty:
1 unit
Supply Capability:
1 unit/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

Forklift Description:

Guided Very Narrow Aisle truck - A counterbalance type Sit Down Rider Electric Forklift fitted with a specialized mast assembly. The mast is capable of rotating 90 degrees, and the forks can then advance like on a reach mechanism, to pick full pallets. Because the forklift does not have to turn, the aisles can be exceptionally narrow, and if wire guidance is fitted in the floor of the building the machine can almost work on its own. Masts on this type of machine tend to be very high. The higher the racking that can be installed, the higher the density the storage can reach. This sort of storage system is popular in cities where land prices are really high, as by building the racking up to three times higher than normal and using these machines, it is possible to stock an incredible amount of material in what appears to be a small space. 

Guided Very Narrow Aisle Order Picking truck - counterbalance type Order Picking Truck similar to the Guided Very Narrow Aisle truck, except that the operator and the controls which operate the machine are in a cage welded to the mast. The operator of course wears a restraint system to protect him against falls. Otherwise the description is the same as Guided Very Narrow Aisle truck. 

Truck Mounted Forklift / Sod Loader - comes in Sit Down Center Control. Usually has an Internal Combustion Engine. Engines are almost always diesel, but sometimes operate on kerosene, and sometimes use propane injection as a power boost. Some old units are two stroke compression ignition, most are four stroke compression ignition (common). North American Engines come with advanced emission control systems. Forklifts built in countries such as Iran or Russia will typically have no emission control systems.

Cost 

 

 

Forlift Specification:

Model

CPCD30FR

Load capacity kg

3000kg

Load center mm

500mm

Power type

Diesel

Max.lifting speeds(with load)mm/s

400mm/s

Max.Driving speeds(with without load) km/h

18/20km/h

Max.Towing speeds

15.5/10.5kN

(with/without load)kN

 

Gradeability(with/without load)%

15/20%

H1 Lifting height mm

3000mm

Free lift mm

80mm

Tilting angles(forward-backward) 。

6/12

Min. turning radius mm

2500mm

Min. right angle aisle width mm

2110mm

Min. under-clearance mm

135mm

Dimensions

A Overall length(inincluding fork) mm

3800mm

B Overall width mm

1230mm

H Overall height(mast lowered) mm

2100mm

H2 Overall height (mast extend) mm

4270mm

H3 Overall height to overhead guard mm

2110mm

A1 Fork overhang mm

465mm

A2 Wheel base mm

1700mm

Tread

B1 Front tread mm

1000mm

B2 Rear tread mm

970mm

Tyre

Front tyre

28×9-15

Rear tyre

6.50-10

Total weight kg

4320kg

B3 Fork width mm

125mm

H4 Fork thickness mm

45mm

Backrest height mm

1225

A3 Fork length mm

1220mm

Engine

Engine model

490

Rate power KW

39KW

Rotate Speed At Rate Power rpm

2650rpm

Max.torque Nm

157Nm

Rotate speed at max torque rpm

1980rpm

Type of power shift

Hydraulic


 

Forklift Images:

 

 

FAQ of forklift:

Q: What’s the function of forklift?

A: A forklift truck (also called a lift truck, a fork truck, or a forklift) is a powered industrial truck used to lift and move materials short distances. The forklift was developed in the early 20th century by various companies including the transmission manufacturing company Clark and the hoist company Yale & Towne Manufacturing. Following World War II the use and development of the forklift truck has greatly expanded worldwide. Forklifts have become an indispensable piece of equipment in manufacturing and warehousing operations.

 

Q: What’s the general operations of forklift:

A: Forklift cab with control layout.

Forklifts are rated for loads at a specified maximum weight and a specified forward center of gravity. This information is located on a nameplate provided by the manufacturer, and loads must not exceed these specifications. In many jurisdictions it is illegal to remove or tamper with the nameplate without the permission of the forklift manufacturer.

 

Q: What are the Forklift safety Standards?

A: 1, Forklift safety is subject to a variety of standards world wide. The most important standard is the ANSI B56—of which stewardship has now been passed from the American National Standards Institute (ANSI) to the Industrial Truck Standards Development Foundation after multi-year negotiations. ITSDF is a non-profit organization whose only purpose is the promulgation and modernization of the B56 standard.  

2, Other forklift safety standards have been implemented in the United States by the Occupational Safety and Health Administration (OSHA) and in the United Kingdom by the Health and Safety Executive.

3, Driver safety: In many countries forklift truck operators must be trained and certified to operate forklift trucks. Certification may be required for each individual class of lift that an operator would use.

 

 

 

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:Does the forklift have only one wheel? Front engine
Due to the effect of differential, when a car driving wheel stuck in soft ground on the other side of the wheel is common to skid, and generally no differential lock, lock generally only suv there speed.
Q:Can a forklift get on the highway?
Forklift is special vehicles, motor vehicles within the factory, the according to the regulation on administration of motor vehicle safety inside the plant, plant of motor vehicles, refers to an enterprise which is limited to within the scope of the factory (including production area such as docks, freight yard or construction site) and the operation of motor vehicles. So forklifts are not allowed to go on the road.
Q:The forklift should be put on record
The forklift truck is required for a yearly check It's like a car
Q:What should 80V force forklift voltage current be?
Normal internal combustion forklift truck Generally use diesel, gasoline, liquefied petroleum gas or natural gas engine as power, load capacity of 1.2 ~ 8.0 tons, homework channel width is generally 3.5 ~ 3.5 meters, emissions and noise into consideration, usually used in outdoor, workshops or other places with special requirements for emissions and noise did not. Due to the convenience of fuel replenishment, long time continuous work can be achieved, and can be suitable for work in bad environment (such as rain).
Q:Electric forklifts can be used for a long time
Look at the use case, look at work environment, look at worker's labor attitude, average about a year and a half.
Q:Can a forklift drive into an elevator?
A forklift can open a fork in an elevator and use a smaller forklift. First to see what kind of elevator, the elevator is the elevator and forklift forklift can enter into the elevator from the design has the very big difference, if you want to prohibit forklift forklift truck to enter the elevator can cause damage to the elevator, serious safety accidents will happen, please confirm whether to allow forklifts into the elevator, the elevator in order when I was determined, the elevator can confirm the technical specification, whether or direct consultation elevator manufacturer this type forklift trucks are allowed. There should be a warning sign in the doorway or inside of the normal elevator. Forklift truck is an industrial transport vehicle, which is a variety of wheeled transport vehicles for loading and unloading, stacking and short-range transportation. International standardization organization ISO/TC110 is called an industrial vehicle. Often used for the transportation of large items in storage, usually with a fuel engine or battery.
Q:The photo of the forklift card is a few inches. Is it colorful?
Just plain 2-inch color photo will do my job!I hope my answer will help you.
Q:The forklift test has those projects
The forklift test is divided into three subjects, which are mainly for the pre-operation inspection of forklift truck, forklift truck and forklift truck. Forklift test subject 1: forklift operation check Before and after the forklift operation, the appearance should be inspected, and the fuel, lubricating oil and cooling water should be added. Check for starting, running and braking safety. Check to see if the lights and speakers are fully available. The forklift should check the pressure and the temperature is normal. The forklift should also check the leak and replace the sealing parts in time.
Q:What is the section 4 and 3
Give you detailed answers. 1, the forklift professional qualification certificate: first, medium, high, technicians, senior technicians, five levels, in turn: five, four, three, two, one level. Level 4 is intermediate, level 3 is advanced. This is from the human society bureau. Used to evaluate technical workers' wages. The forklift also has a certificate, which is called the operation certificate of the equipment, which is issued by the bureau of quality supervision, regardless of grade. Commonly known as operation certificate.
Q:Skill and use of side forklift?
Here's how to use the side forklift: Its characteristics are the side of the fork facing the forklift truck, the door frame, the lifting mechanism and the fork in the center of the forklift truck, and can be moved sideways along the lateral track. The cargo fork lifts the cargo from the side fork of the forklift truck, and then the door frame moves inward, placing the cargo on the platform of the forklift, and then walking again. Side forklifts are used for loading and unloading of long pieces of goods such as steel, wood and other containers for loading and unloading containers. When the side fork lifts the fork or the cargo, the lateral hydraulic arm should be lowered to reduce the load on the side tyre and the lateral stability of the forklift truck. The frame and arm of the loader high strength and durability. The loading machine can add more convenience and improve the stability of the whole machine. The production equipment is excellent in the research and development, the raw grasping wooden machine the structure is compact, the maneuver is flexible, the operation is convenient, the installation dismantres fast.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range