2mm HDPE Geomembrane for Pond Liner with CE

Ref Price:
Loading Port:
Qingdao
Payment Terms:
TT OR LC
Min Order Qty:
10000 m²
Supply Capability:
300000 m²/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

 

Description Of HDPE Geomembrane for Pond Liner:

Our high density polyethylene (HDPE) geomembranes provide an impermeable barrier against a wide range
of solids and liquids. They exhibit excellent chemical and UV resistance, impermeability, and high yield and
welded seam strengths, which is widely used as the liner.

Main Features of HDPE Geomembrane for Pond Liner:

 1.Long life, anti-aging, roof material can be more than 20 years, underground can be more than 50 years.

 2. Good tensile strength, high elongation.

 3. Good high/low temperature flexibility

 4.Easy to construct, no pollution.

 5. Good anti-corrosive ability, can be used in special area

6.Various colors are available

 

Specifications of HDPE Geomembrane for Pond Liner:


 

 

No.

Item

Test Value

0.75mm

1.0 mm

1.25 mm

1.5 mm

1.8mm

2.0mm

2.5 mm

3.0mm

1

Minimum Density(g/cm³)

0.94

2

Strength at yield,N/mm

11

15

18

23

27

30

38

45

3

Strength at break ,N/mm

21

28

33

43

51

57

71

85

4

Elongation at yield,%

13

5

Elongation at break,%

700min

6

Tear Resistance N

93

125

156

187

219

249

311

373

7

Puncture Resistance N

263

352

440

530

618

703

881

1059

8

Stress Crack Resistance, hrs

400

9

Carbon Black Content, %

2.0-3.0

Carbon Black Dispersion

1 or 2

10

Standard OTI Min

100

High Pressure OTI Min

400

11

Impact Cold Crack at -70°C

Pass

12

Water vapor permeability

(g.cm/cm2 .s.Pa)

≤1.0×10-13

13

Dimensional Stability (%)

±2


Applications of HDPE Geomembrane for Pond Liner:

1.Prevent leakage disposal in waste burying field or waste water or waste dregs disposing field,river bank,lake dam ,mine remainings ,reservior,tunnel,liquid storage ,pool(pit,mine)

2.Preventing leakage in subway ,basement,tunnel ,hole

3.Anti-solt leakage in roadbed and other groundtill

4.The plane direction laying of dam ,the vertical direction laying fou groundtill ,used in the construction fence and waste material field

5.Used in seawater or freshwater feed field

6.Used in groundtill of road,highway ,railway and waterproof layer of swelling clay  and wet collapsed loess

Preventing leakage on rooftop.

 

IMages of HDPE Geomembrane for Pond Liner:


2mm HDPE Geomembrane for Pond Liner with CE


2mm HDPE Geomembrane for Pond Liner with CE 

2mm HDPE Geomembrane for Pond Liner with CE


 

FAQ:

1. Do you supply free samples for customers?

Yes,we will supply free samples for you.Please send your address for us.

2. How Many years experience do you have?
We have been exported to more than 20 countries in the past 15 years.

3. How long do we usually reply your request?

We always reply our customer within 24 hours.

 

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:The physical properties of HDPE geomembrane
It has the following physical properties: ① excellent chemical resistance (corrosion resistance); ② outstanding resistance to stress cracking (ESCR); ③ the lowest permeability; ④ excellent UV resistance; ⑤ stable resistance to low temperature embrittlement;
Q:What is the HDPE geomembrane of rough surface?
The rough surface HDPE geomembrane material is composed of 97.5% high-quality polyethylene, 2.5% carbon black, trace antioxidant and heat stabilizer. The rough surface is the result of a special co-extrusion process, the process is a molding production, the most important characteristic rough surface HDPE geomembrane offer is that it can increase the stability of the slope material, from Ji-light delay Gan hoot imitation dec containing wet splashing and ultimately HDPE geomembrane can carry Kongyong Rong maximize product adapted to the characteristics of the laying of a steep slope in cost savings but also improve design capabilities.
Q:Is geomembrane the first choice in landfill anti-seepage?
HDPE geomembrane filament geotextile GCL.
Q:How to make sure there is no bubble on the film?
When pasting, the dirty things should be cleaned and the air should be blocked out so that there are no bubbles.
Q:How to install the electric heating film?
1, Cleaning the ground and paving the extruded sheet of 2-3 cm thick. 2, Tailoring and laying the electrothermal film side by side according to the requirement. 3, Connecting the electric heating film parallelly (according to the standard construction connection drawings, single electrothermal membrane should not exceed 10 meters). 4, Using special tool to connect firmly the special clips with the electrothermal film metal loading bar and connecting the electric wire. 5, Wrapping connected parts with insulating plaster to prevent water and ensure insulation. 6, Allocating the air switch according to the total power, connecting the thermostat and sensor and putting the probe of the sensor probe into the area of the ground that is the easiest to be heated to prevent the heating film from being overheated. 7, adding the drive pipe to the sensor, cutting the drive pipe at the head of the sensor and sticking the sensor to the heated carbon strip of the electrothermal film with insulating plaster. 8, Checking it. 9, Wrapping the electrothermal film with waterproof cloth (for cement construction) or paving non-woven fabric (for floor or the floor sheet construction). 10, Starting the temperature controller to measure the temperature. 11, paving the geothermy plastic net, pouring cement mortar, inlaying floor tiles (cement construction) and paving the floor (floor construction) 12, The construction is completed.
Q:Chernozem, reservoir foundation, slope treatment (geomembrane reservoir) methods. The more detailed, the better. And the best with pictures. . .
1, first flatten and tamp original drawing 2, dig 400mm × 600mm ditch at the bottom 3, brush slope - engineering or mechanical side slope brush design 4, pave 50mm-long and 0.8 thick washed-out sand 5, pave geomembrane 6, apply 30mm cement mortar on geomembrane door 7, assembling reinforcement on cement mortar surface layer 8, asphalt crack pouring
Q:What is the size of 156 inch computer film?
Generally, the size of a 15.6-inch notebook computer is 15.5-36mm. The size of a 15.6-inch ASUS, Acer, lenovo notebook computer is generally 387mm long and 259mm wide. The thickness varies from 15.5mm to 36mm according to different brands. It can be divided into the ultra-thin and business computer and so on.
Q:What are the characteristics of the three layers of protective film of PET film?
Characteristics of three layers of protective film of PET film: 1. It can effectively prevent abrasion and scratch on the screen of notebook computer; 2, Anti-static surface prevents accumulation of dust with strong antifouling performance, and it can be wiped by a soft cloth; 3, Direct contact is not easy to leave fingerprints; 4, Special resistance to radiation, reflection and glare, eliminating 98% of ambient light reflection, and it has certain eye protection function;
Q:How about the warm reflective film?
Warm reflective film is very good. It is commonly known as "aluminum foil" or "tin foil". But strictly speaking, it is not real "aluminum foil" or "tin foil". In fact, it is a kind of product made of high vacuum aluminum laminated films, paper, cloth and other insulation materials. Warm reflective film is the key part of the floor heating system which ensures comfortable temperature of floor and improves the heat reflection and radiation.
Q:How to remove the casings lamination of laptop?
The general protective film is of more than one layer. Gently pry the pasted protective film from the corners of the computer screen, and then pull it up by hand. If you want to continue to use the protective film, you should pay attention to making your fingers away from the adhesive side of the protective film, otherwise the film will be stained with fingerprints which are difficult to remove and will have influence on its appearance.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range