Q:What are the condensers made of?

Such as solenoid valves, dispensers, dryers, heat collector, fusible plug, pressure controller and other components, they are in order to improve the economy of operation, reliability and safety setting.

Q:Refrigerators do not cool, compressors do not work, but very hot, what is the reason?

Check the external power supply and the compressor input voltage

Q:What is the function of the air conditioning condenser?

The high pressure and high temperature refrigerant gas discharged from the compressor enters the condenser coil outside the chamber and is cooled by the airflow outside the fan (about 35 degree C) driven by the fan

Q:What is the working principle of the condenser?

Gases pass through a long tube (usually a solenoid) to dissipate heat into the air around them. Copper and other metals have a strong thermal conductivity and are often used to transport steam. In order to improve the efficiency of the condenser, heat transfer fins with excellent heat transfer performance are often used on the pipeline to increase the heat dissipation area to accelerate heat dissipation and to speed up air convection through the fan and take away the heat.

Q:How to deal with the liquid hammer phenomenon of compressor

The cause of liquid hammer is refrigerant or excessive lubrication, the liquid is too fast, the expansion valve (or valve) the regulation degree (opening) is too large, the heat load of evaporator (heat transfer) is not stable, large open type compressor suction valve open too fast (or unloading capacity too fast). System design and installation is unreasonable, abnormal shock may have caused the compressor

Q:What are the types of condensers?

The condenser is often used for the condensation of the two steam at the end of the multi effect evaporator to ensure the vacuum of the final effect evaporator

Q:What are the system components of condensers?

The main components of a motor (compressor, fan etc.), operation switch, electromagnetic contactor, relay, chain, thermal overcurrent relay overcurrent relay, temperature regulator, humidity regulator, temperature switch (defrost, prevent freezing etc.). Compressor crankcase heater, water break relay, computer board and other components.

Q:What is the purpose of a two-stage compression refrigeration cycle?

The traditional air conditioning system can only achieve the lowest heat at minus 7 degrees Celsius environment itself, and adopting the two-stage inverter air conditioner double stage compressor can be achieved in the limit condition minus 30 DEG C under strong heating

Q:What's the difference between compressor and air compressor?

Both are provided with different medium pressure is compressed. Is a standard atmospheric air through the transformation of the mode of energy output to meet the needs of users of air equipment, energy conversion is generally understood as mechanical energy into kinetic energy

Q:What is the function of the hydraulic differential controller in the compressor?

When the oil pressure drops to insufficient to make the compressor work safely, it has not been restored to the set oil pressure value during the delay setting