1.With Cat5e keystone modules used for 19"cabinet ,Complete metalation and reed construction, modularization design
2.IDC: phosphor bronze and silver plating (20-50uinch), suitable diameter 0.4-0.6mm, durability 200 cycles
3.Contact pin: phosphor bronze and gold plating (20-50uinch), mating durability not less than 750 cycles
4.Anti-burn performance: plastic part made from PPO and PC, meeting the international standard
5.Intermediate resistance: no more than 2.5m ohm in normal atmosphere pressure (not including bulk resistor)
6.Insulated resistance: no less than 1,000M ohm in normal atmosphere pressure
7.Theintensity of anti-currency: DC 1,000V (AC,700V) No puncture andflash-over phenomenon in one minute. Accord with industry standard
8.Label: clear label to ensure easy to manage
9.Type: unshielded ,24 ports.
10.Standard: designed by international ISO/IEC11801 and TIA/EIA568
11.Adoptspecial IDC,suitable for use both LSA insertion tools and 110 type impact tools,180wire termination.
- Q:What is the waterproofing between the casing and the cable?
- Optical fiber is the transmission of optical signal path, optical splitter is the fiber patch panel, sub-line multi-device use. Differences: The fiber is the backbone and the splitter is the pole that connects the user with. Splitter is a passive device, also known as optical splitter, they do not need external energy, as long as there is input light can be. The splitter consists of incident and exit slits, mirrors and dispersive elements, which separates the desired resonant absorption lines. The key component of the splitter is the dispersive element, which is now the use of gratings. Atomic absorption spectrometer on the resolution of the splitter is not high, had to be able to distinguish the nickel three lines Ni230.. Ni231.. Ni231.096nm as the standard, after the use of Mn279.5 and 279.8nm instead of Ni three lines to verify the resolution. The grating is placed behind the atomizer to prevent all unwanted radiation from the atomizer from entering the detector. The splitter is the data transmitted through the optical fiber after a copy of the optical data for monitoring purposes. Superfluous that the concept of splitter similar to the "three links" means that the normal flow of the normal passage, while a share out for the use of monitoring equipment analysis. In fact, this is only the concept of the most simple splitter, technology development has produced a variety of optical splitter: there can be a number of links together to get together the splitter, there is a link flow into several splitter, and so on , Can no longer use the "three links" to the simple summary of the word. The industry's more popular Tap brands are NetOptics and fluke, etc., of which Netoptics is the industry recognized the first brand splitter, the market share of the first, most stable, the best performance.
- Q:How is the square of the multi-stranded wire calculated? Anxious, anxious
- So that you can only split the screen to use you can send a display from the Internet shell and then the apple screen installed
- Q:What does the cable ZR-YJY-1 mean, the focus is -1 what does it mean
- Yellow is not half yellow, half is green If so. Please connect black and brown, these two are FireWire, you can freely swap the location. But do not get together.
- Q:What kind of cable does the power cable 3 (1 * 240) +2 (1 * 120) Is it a separate cable?
- Indoor wiring with wire trunks, it should be such a construction sequence: 1. Let the electrician first all the switch box all the lines put away. 2. Then, call the painter to make all the wall brush gray. 3. Call the electrician to secure the trunking on the wall and enclose the wire in the trough. 4. Next called the paint on the latex paint. 5. After the end of the painter, and finally called the electrical installation of household appliances and lighting. Why should this be done? I explain to you the reasons: paint workers and electrician cross construction, is to both the construction does not conflict, interference. Can better grasp the construction quality of both, but also improve the efficiency.
- Q:PCB wiring, is not the line the wider the better?
- Should be the GY, is the meaning of hard casing ..415 in front of 2.3.4 is light. Medium. Heavy meaning, is the pipe wall thickness is not the same 16 is the diameter GY215-16 ---- light 16 Wire GY215-20 ---- light 20 of the wire tube GY215-25 ---- light 25 of the wire tube GY315-16 ----- medium 16 of the line tube GY315-20 ----- medium 20 Wire GY315-25 ----- medium 25 pipe line GY415-16 ----- heavy 16 of the line tube GY415-20 ----- heavy 20 of the pipe GY415-25 ----- heavy 25 of the wire tube
- Q:Kbg wire tube specifications how many, who can explain kbg tube specifications?
- Name: Rubber over line bridge English name: Rubberlinebridge rubber over the bridge the highest load of 65 tons
- Q:Relocation, the telephone line is not long enough, just to buy more cable, can be used as a telephone line extension line, one can take two-step phone, how to pick up?
- Or connect directly to the fiber, this way requires your center switch and layer switches must have a fiber interface; or come in with fiber connected to the central switch, and then use twisted pair connected to the layer switch. wish you happy! The The
- Q:I would like to ask the next communication project in the cable tie is what the situation to use, how to calculate it?
- Amdnvidia official said crossfire sli up to four. The actual to the four-way, the game efficiency of a lump Xiang. So much to be so much, it is practical mining.
- Q:The new burner is not connected to the computer, display "unrecognized USB device", find a solution!
- Re-alignment is it, we generally put the original building of the weak power to take away again.
- Q:Apple phone display cable or accessories not certified how to do
- 3 When using insulated and sheathed cables for non-flammable materials, do not wear metal tubing, but should be laid in the cable wells Fire alarm system design specifications (GBJ116-98) 1 fire automatic alarm system transmission lines should be used to wear metal pipe, the flame retardant treatment of rigid plastic pipe or closed trunking protection wiring 2 fire control, communication and alarm lines with dark laying, should use metal pipe or flame retardant treatment of rigid plastic pipe protection, and should be laid in the structure of non-combustion body layer, and the protective layer thickness should not be less than 30mm When the use of Ming laying, should be used metal pipe or metal trunking protection, and should be in the metal pipe or metal trunking to take fire protection measures When using a flame-retardant cable, it may be protected from metal pipes, but should be enclosed in closed trunks with fire protection measures in cable shafts or ceilings Commonly used metal pipe, do not require the case can be used PVC pipe
Our corporation's products cover more than ten categories and over 200 specifications, including Cat5e, Cat6 keystone jack series, patch panel series, face plate series, multimedia casing series, junction box series, distribution cabinet series, clamp module series, protection unit series, insertion tool series, STB series, PCB socket series, cross connection terminal and heat-shrinkable sleeve series, MDF, DDF and ODF series, fused fiber splice modules (trays), integrated fused terminal trays and other telecommunication accessories.
1. Manufacturer Overview
|Annual Output Value
||US$5 Million - US$10 Million
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
||31% - 40%
|No.of Employees in Trade Department
||Below 1,000 square meters
|No. of Production Lines
||OEM Service Offered Design Service Offered Buyer Label Offered
|Product Price Range
||High and/or Average