This 220v waterproof flexible smd led strip uses flexible circuit board, which has excellent performance. It is easy for cutting and connecting. Under high temperature, waterproof and dustproof, these led strips can reach up to IP68, ultra-thin thickness of 3mm, 3M double-sided tape fixed, what is more, its service life can be over 50000H, and it also can be produced according to customer's specific requirements.
Milk color tube encased
3M adhesive tape on its back
Solid-state, high shock or vibration resistant
Major reduction in power costs
No RF interference
No UV radiation
Instant soft start
Easy installation, maintenance free
Longlife: 50, 000 hours
Low power consumption, high intensity
100M/ROLL,can be cut each meter
5050 SMD Led Strip
SMD 5050 LED
60pcs per meter
Single color & RGB
1). Power 110-240V and white or yellow PCB are available
2). Dimensions and LED quantity can be customized
- Color:W/R/B/Y/G/P/RGB/Dream/Full color
- Waterproff(IP55:Silicon or Glue Drop/IP68:Irrigation Glue) or Non-waterproof(Ip33)
Architectural decorative lighting
Ad words, ultra-thin light boxes, light words, luminescent signboard backlights;
Buildings, bridges, signboards and other decorative outline;
High-end stores, shopping malls, home and other indoor lighting;
Cars, corridors, staircases, furniture, show windows and other decoration, hidden location and indoor dark trough lighting;
Bars, KTV, cafes, stages and other entertaining places atmosphere rendering;
Salons, handicrafts and other high-end counter lighting.
Channel letter lighting
Emergency exit path lighting
Customize your strip light by picture or by technical datas.
Packing & Delivery
plastic bag intside, cartons outside
Estimated Delivery Time
2-8 business days
3-8 business days
2-10 business days
1-7 business days
6-14 business days
7-12 business days
China Post Air Mail
7-15 business days
China Post SAL
14-30 business days
3-10 business days
30-40 business days
1. 3-5 business days for Sample Orders; 7-30 business days for Bulk Orders for Bulk Orders.
2. "Business days" means Monday-Friday, excluding holidays.
3. DHL and UPS cannot ship to military or P.O. boxes address
4. The Shipping Service above is for reference only, for any other questions, please feel free to contact us.
- Q:How do you control the two LED lights with a remote control?
- Don't know what you mean, just buy a double control of the remote control switch can.
- Q:LED what does the band add to change colors?
- The 2 wire dual chip is a chip that changes color by changing both positive and negative inputsThe 3 chip (RGB RGB) is at least a common line 4 line into the other three are respectively connected with the RGB by changing the load in the RGB end of the current size change display color which is a special RGB controller of the lamp belt is generally connected to the output of the switch mode power supply (RGB controller is 12V with remote control)
- Q:LED lights bring what is high pressure, what is low voltage?
- Low voltage LED light belt is 220 volt cross flow, 12 volt DC power supply (with a small converter box), can also be battery or battery power supply, generally with a length of 6---10 meters long, suitable for civilian use. The high voltage LED light belt is 220 volt AC direct power supply, usually 50---100 meters long, suitable for commercial use.
- Q:How long is the life of the LED light belt?
- Long life (quality). 8~9w hours, led heating, temperature is not high, no incandescent lights so exaggerated
- Q:Can one of the four LED lights carry a five?
- If it is low voltage, powered by a dedicated power supply, and not rich, it is not possible.
- Q:Connect the LED light belt to change the electric wire!! the result electrify! The electric wire heating, the interface is electric hot, how to return a responsibility?
- After the LED lamp is switched on, the wires heat up. It is possible that the new wires are smaller in diameter. After the LED lights are transmitted, the working current exceeds the safe current that the wires can carry. Recommended for a thicker wire (for example, is now 1 square wire, replacement of 1.5 square wire, specifically to see the lights with LED is the number of meters, the load is much, select the appropriate wire); or the LED lamp with cut part, so that the existing wire can be left with LED lamp the safety of power supply.
- Q:How about the power of the LED lamp?
- In general, 30 meters of lamp / lamp with the larger current LED. such as 0.028A, calculate the power per meter (30 / 3: lamp lamp group) * (12V * 0.028A) =3.36W; and 60 meters of lamp / lamp with LED will use less current to produce, for example: 0.011A calculate the power per meter (60 / 3: lamp lamp group) * (12V * 0.011A) =2.64W.
- Q:Led how to install the lamp belt, LED lights with the installation process detailed
- Please do not use heavy objects to knock on the lamp and to shock when installing and using it.At the end of 7. tube must be caught before the tail plug with glue.8. only the same specifications, the same voltage of the two section of the lamp string can be connected to each other, the total length of the series shall not exceed the maximum allowable length9., the interface must be solid, no short-circuit hazards, outdoor installation, the interface must be glass glue or other appropriate methods to seal the interface, to ensure that each interface water.
- Q:How much is the power consumption per meter?
- The small bulbs per meter of at least 30 (the interval of 3 cm), 15 meters close to 500, with the LED light emitting diode, each 0.05 watts of power, therefore, with a total power of 25 watts; as with ordinary small bulbs, each bulb power is about 0.2-0.3 watts, so the electric power 100-150 watts
- Q:What are the LED patch bands, single panels and double panels? What's the difference between them?
- There are many types of PCB boards, but common ones are single panels and double sided panels. A single panel is a circuit with copper plating only on one side of the board, and there are both sides of the double sided board, but the circuit on both sides can be connected by passing through the hole so that the board becomes a complete circuit.
1. Manufacturer Overview
|Annual Output Value
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
|No.of Employees in Trade Department
|No. of Production Lines
|Product Price Range