2018 PPR Pipe Fittings for Landscape Irrigation System
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 pc
- Supply Capability:
- 1000000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product Overview
1) Cold / hot water supply facilities for public buildings
2) Food, chemical, electronic industry pipeline networks; Such as Pipeline networks for transporting all kinds of corrosive liquids
3) Drinking water production system pipeline networks; Such as Pure water and mineral water
4) Air conditioning facility pipelines
5) Compressed gas pipeline networks for industry
6) Pipeline networks for swimming pools
7) Pipeline networks for solar energy facilities
8) Agriculture and garden production transporting systems
Advantanges
1, High Temperature Resistance: the maximum sustained working temperature is up to 70 Degrees Celsius, the maximum transient temperature is up to 95 Degrees Celsius.
2, Heat insulation and Saving Energy: low thermal conductivity which is only 1/1500 of brass pipe, and 1/250 of steel pipe.
Non-toxic: no heavy metal additives would not be covered with dirty or contaminated by bacterium.
3, Corrosion Resistant: resist chemical matters or electron chemical corrosion.
4, Lower Installation Costs: light weight and good hot-melt performance can reduce installation costs by as much as 50% over metal piping system.
5, Higher Flow Capacity: smooth interior walls result in lower pressure loss and higher volume than metal pipes.
6, Long Life: more than 50 years under normal conditions.
7, Recycled and Environment-friendly.
Product Description
Pressure | Size(mm) | Pressure | Size(mm) |
PN1.25MPA | 20*2.0 |
PN1.6MPA | 20*2.3 |
25*2.3 | 25*2.8 | ||
32*2.9 | 32*3.6 | ||
40*3.7 | 40*4.5 | ||
50*4.6 | 50*5.6 | ||
63*5.8 | 63*7.1 | ||
75*6.8 | 75*8.4 | ||
90*8.2 | 90*10.1 | ||
110*10.0 | 110*12.3 |
Product Show
FAQ
Q1: How Can I Get A Sample?
A1: You can get samples by communicate with our export sales.
Q2: How Long Is Delivery?
A2: Delivery time will be30-45days according to order quantity.
Q3: What Is The MOQ?
A3: MOQ depends on different items.
Q4: What Is Our Normal Payments Terms?
A4: Our normal payment terms now is: T/T, L/C or western union, pay
- Q:How are plastic tubes stored to maintain their shape?
- Plastic tubes are typically stored in a vertical position to maintain their shape. Additionally, they are often kept in racks or holders that provide adequate support and prevent any bending or warping.
- Q:Is the diameter of the plastic tube 20mm in diameter 18mm?
- The diameter 20mm refers to the inner diameter of the plastic pipe. 18mm shall also refer to the inner diameter of the pipe.
- Q:How do plastic tubes compare to Teflon tubes in terms of chemical resistance?
- Plastic tubes generally have good chemical resistance, but Teflon tubes are known to have exceptional chemical resistance due to their non-reactive nature, making them more superior in terms of chemical resistance compared to plastic tubes.
- Q:Hot melt connection method of PE-RT plastic pipe and the matters needing attention
- When the connection is made, the pipe end without rotating is inserted into the heat sleeve to be inserted into the marked depth, and at the same time, the pipe fittings without rotating are pushed on the heating head to reach the designated mark. Heating time should meet the requirements of the above table (also according to the provisions of the manufacturer of hot melt tools);
- Q:How do plastic tubes perform in low-pressure applications?
- Plastic tubes generally perform well in low-pressure applications. They are lightweight, flexible, and have good resistance to corrosion and chemicals. However, their performance can vary depending on the specific type of plastic used and the application requirements. It is important to consider factors such as temperature, pressure, and compatibility with the fluid being transported when selecting plastic tubes for low-pressure applications.
- Q:Where is the orifice tube located in a 2000 Pontiac Grand Prix3.8 liter V-6
- Orifice Tube Replacement
- Q:me and my father were trying to fix a leaf blower(the cord you have to pull will come out but won't go in) and ran into a few problems. we had to pull the whole thing apart to get to it, and along with pulling everything off we had to take off the switches that handle choke and run, and the tubes connected to this device were corroded from gas left in the leaf blower. where can i buy this tubing, and some sealant for the tubes? i DO NOT want a website that i can order them from, i want an ACTUAL store in the Dallas fort worth area.
- Any hardware store. Take a piece of the old with you and be sure to get the right size. Also make sure it is for fuel. They have other plastic tubing that is not for fuel. You shouldn't need a sealant if you get the right size tubing. If you have to run the tubing through the fuel tank as an example, cut the end of the tubing with a razor blade or sharp knife at an extreme angle to make a point at the end of the tube like you would sharpen a pencil. It will go through the hole easier and you can square it off later.
- Q:Are plastic tubes resistant to punctures?
- No, plastic tubes are not inherently resistant to punctures.
- Q:Can someone tell me what that plastic elbow tube is called on the backside of my heater coil? VW Golf 2000.?
- Plastic elbow, on the metal heater core itself? Probably there would be two of them. Water in and water out. On the plastic box the heater core goes in? Just the one on the box. That would be a cavity water drain to keep it dry in there and cut down on Mold/Mildew. Heater CORE in the USA. ASE Cert Auto Tech, since 1978, 2003 GLI
- Q:I don't need the candy, just the tubes. Do you know where I can buy them in bulk , and at a reasonable price?
- I have no idea, but it is a very specific question... I don't even know what sandy candy is...
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
2018 PPR Pipe Fittings for Landscape Irrigation System
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 pc
- Supply Capability:
- 1000000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
