Square Downlight 18W (Power for 5W/7W/10W/12W/15W/18W)
Model : FL-SD-18W
Work Voltage: 85-265V AC 50/60 HZ
Cut-Out Size: 165X165mm
Size : 185X185mm Square Downlight
Power : 18W
Luminous flux: 100-110lm/W
LED chip: Epistar
Beam Angle: 150deg
Input voltage: 85-265 AC
Life Time:30000-50000 Hours
Light source:Power LED
Rated power: 18W
Input voltage: 85-265 AC
Luminous flux: 100-110lm/W
Beam angle: 150 º
Housing material: aluminum alloy and PMMA
Light colors: Warm White, Neutral White and Pure White
Color temperature:CRI: ≥80Ra
Warm white: 2,800 to 3,200K
Neutral white: 4,000 to 4,500K
Pure white: 6,000 to 7,000K
IP rate: IP50/class
Mounted place: indoor
Operating temperature: -30 to 45°C
Operating humidity: 10 to 90% RH
Average lifespan: 50,000 hours
Warranty: 3 years
Hotels, offices, shopping malls and other indoor commercial lighting
Installed into the ceiling or other reserved places
Can be used as rotatable ceiling lights, grid lamps, shading lamp hotspot light if adapted with different fixtures
Estimated Delivery Time
2-8 business days
3-8 business days
2-10 business days
1-7 business days
6-14 business days
7-12 business days
China Post Air Mail
7-15 business days
China Post SAL
14-30 business days
3-10 business days
30-40 business days
1. 3-5 business days for Sample Orders; 7-30 business days for Bulk Orders for Bulk Orders.
2. "Business days" means Monday-Friday, excluding holidays.
3. DHL and UPS cannot ship to military or P.O. boxes address
4. The Shipping Service above is for reference only, for any other questions, please feel free to contact us.
- Q:LED lamp power off why would light up
- LED lamp power off, will light up, this situation is normal in the 220 electric power supply situation, reason is caused by the distributed capacitance charge discharge line.Because the switch and the lamp is connected with 220V/50Hz AC power supply is normal, directly added to both ends of the lamp, the lamp work light; when closed, switch capacitor and lamp itself and the line is connected to the alternating current of 220V/50Hz, because the distributed capacitance of the charge and discharge can form weak current, the lamp will light.Solution: in the lamp circuit board input end in parallel with a pressure resistance of at least 400V of non-polar capacitor, capacity 0.05 micro method above (if the switch connection is longer, can be appropriately increased).
- Q:LED ceiling lamp and LED downlight what is the difference
- LED is a kind of lamps downlight than ordinary lamp with light, usually used for general lighting or auxiliary lighting.The LED spotlight is a highly focused luminaire with light rays that have a specific target to be specified. Mainly used for special lighting, such as emphasizing a very good taste or very innovative place.
- Q:Home LED lighting downlight is broken, want to change themselves, I would like to ask how to remove ah? Where do you start?
- Waiyan button lights down pull down. Check the lamp plug is not loose. If there is no loosening that is bad (light card lamp bowl is a spring clip). To the store to buy a plug lamp behind the plug on the line (regardless of polarity). When the lamp. After the spring clip like middle pressure can turn the light back to the hole in the ANN.
- Q:The opening 7, 5 cm height of the LED lamp, home decoration into the floor with fear of hydrochlorothiazide
- The average height is around 45mm-60mm. If your space height is greater than 60mm, you don't have to worry.
- Q:Common questions about LED downlight spotlights
- As long as dimming drive is 220V input, 12--24 output can do cross flow drive
- Q:LED downlight, embedded lamps, lamp tube and difference?
- No LED lamp lens, no light, light uniformity, light angle.LED recessed lamp is in accordance with the method, there are two types of installation and embedded installation. The recessed lamp is mounted inside the ceiling.LED cylinder spotlights have lenses, focus light, first focus on a place to illuminate, and where the illumination is high.
- Q:What brand of downlight is good? Please explain the reason, thank you!
- Quality. After deciding to buy LED lights, you'll have to see what quality LED lights you need. At present, the country has not yet introduced LED lighting quality standards, so the market LED product quality is uneven, some very cheap brand-name goods using the chip quality is very poor, that is 1W, only 0.5W-0.7W, and manufacturers in order to do high brightness, it will increase the output current of power supply, it will cause serious decay. Should choose some brands of their own products, such as "one enterprise", "Hangzhou ray", "silver rain" and other brands.
- Q:Led downlight can light panel directly with intelligent dimming Mody?
- The lights can only be switched on, because the way LED works is different from ordinary incandescent lamps, and dimming panels designed for incandescent lamps cannot hold LED. If you are using the lamp holder and driving split LED light, you can choose an output voltage, current, the same, to support dimming drive to replace the original driver, in order to achieve dimming
- Q:7 square feet of aisle to install 3 LED downlight, how much w led downlight
- My experience with choosing lights was W, and the bigger the headlight. As far as my family is concerned. All unified outfit is downlight 3W downlight. Open your mouth. It's enough
- Q:Why use LED lamp light source patch
- Chip heat dissipation is better than plug-in, long life
1. Manufacturer Overview
|Annual Output Value
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
|No.of Employees in Trade Department
|No. of Production Lines
|Product Price Range