Q:Hi I have a Asus P5vd2-MX SE motherboard with a 24 pin connector. I bought a new power supply but I noticed it has a 20 pin connector. Can I connect it or do I need an adapter? Thanks

You need the 24 pin so you do need to buy an adaptor

Q:If not, and if I have to put a 5 wire connector on the truck, where does the blue wire connect?

I think you will find that one of the wires is for your trailer brakes. The other 4 are the tail, signal l, signalr, and grnd.Is your truck wired for trailer brakes?

Q:I have an OBD - II tool to find check engine codes in my 95 4runner but i cannot find the DLC connector. Its a 95 4runner SR5 with the 3.0L. If anyone could describe the location or has any pictures they could post it would be appreciated.

1995 4runner

Q:I MUST be hard-headed 'cuz I just DON'T understand!! I bought a few games taht are Wi-Fi compatible, and I am new to this whole Nintendo DS deal, so I really need help. To my knowledge it is possible to use a Wi-Fi Connector while playing Pokemon Diamond/Pearl to battle other trainers from ALL over the world! I don't know if my sources are right but I was told that this Wi-Fi Connector had to be used at home on my computer using the Internet connection. My question is how is it possible for me to actually LEAVE my house or even be anywhere for that matter and STILL be able to interact with other users around the world? Or is that even possible. Somebody please explain to me the full functions of this Wi-Fi Connector because it's driving me crazy!! Thanks!Confused and Frustrated : ' D

you purely plug it in on your laptop and your DS will discover the relationship and that's all you like! no longer something :) it is going to artwork with each and every DS pastime that has the Wifi image on the case the pastime got here in. definite, Pokemon Diamond will artwork!

Q:Hi there, I've been looking at building a new system with an AMD Phenom II in it, and an AM3 MOBO to put it in, from the pictures I've been looking at it seems that the 4pin connector near the CPU has been replaced with an 8pin connector. (it's been a few years since I built a PC now) however I have also seen an AM3 board that is suitable with the 4pin connector that I am familiar with.I have been further confused by people telling me that the 8pin connector is an intel thing.Can anyone please shed some light on this for me?

The 4-pin 12V ATX power connector is usually capable of supplying power to processors that draw up to ~100W. The 8-pin EPS 12V power connector is the one that is more capable of handling processors that draw 100 watts. Usually, if the installed processor has a 100W TDP, even if only 4 of the 8 pins are connected, the processor will still run properly.

Q:hithe DC power connector of my MSI GX720 is broken (unit it s out of warranty repair) i want self repair because repairing it will cost 150 euros ,and do not have that money anyway.i ve got JBC soldering iron with tain tape also i bought the new DC connector 5 pin part . what i need a detailed schematic of the MSI GX720 motherboard that show where the dc power 5 pin i could not find it on the the internet ,i ve removed the faulty dc connector which is broken,and i soldered the new one which fit 2 left 2 right pin of the connector are soldered.the problem is the center pin on the motherboard of the laptop it has no tain on it i which does not allow me to solder the center pin of the connectormeans that ther is only 4 drop of tain on the mobo.any help will be appreciated.sorry about my bad english

I've never seen a detailed schematic for any computer or laptop motherboard. If a circuit board trace is missing or broken or if the through hole plating accidentally got pulled out with the old connector, you might find some indication of where it once was if you look closely. Then run a wire from your connector pin to that point. You may have to carefully unsolder the connector you just installed because the remnants of the missing trace might be hidden by it. Good luck. Laptop circuit board repairs usually require excellent soldering skills. Don

Q:I have the option of choosing between an ATX 24-pin Power Connector and an SSI 8-pin CPU Power Connector.Which one should I use and why? Thanks!!

I okorder

Q:i asked this question not sure how long ago and forgot to put i AM pressing the clip on the side i need to install a new psu for my new graphics card so i can play my games at higher settings. i managed to unplug the sata connectors but the 24 pin thing i pull it quite hard and it still wont budge, i dont want to pull it any harder incase i break something please help! thanks!!!

Try gently rocking it back and forth lengthwise. Some of those things are fit really tightly.

Q:I have an Asus Revenge III motherboard with only one USB 2.0 connection but my case has two sets of USB 2.0 cables so I can only connect one side of the front USB ports. Is there a y-splitter available to connect the two cables from the case into one connector allowing me to use all my USB 2.0 ports with the one connection on my motherboard? Also I have a couple of front USB 3.0 connectors on my case but the motherboard doesn't have an internal connector for USB 3.0, just USB 3.0 on the back. Is there a way to connect these to the USB 3.0 without having to buy another USB 3.0 controller card in order to have an internal USB 3.0 connection?

Wow - It sounds like this case motherboard don't really match well. USB - any version cannot be effectively split with a Y or similar stuff. You can use extension cables (as short as possible), powered extensions, and hubs (passive or powered). Inside the case, not practical. You have one internal connector. If you try to connect more than one device, you need a hub ( or a new internal card) to manage multiple devices. If you have an external USB 3.0 port that works, attached to the MoBo - but it faces the back. you -might- be able to hack together a wire adapter that connects that to the front connector on your case. Again- 1-to-1, but I wouldn't try it myself unless I was ready to deal with a fried circuit. If you really want to get the best use out of these, either get an external hub/s, or add internal card/s. There are mixed USB 2.0+3.0 hubs available. That would need to plug into the single USB 3.0 jack you have.

Q:I was thinking to buy a Nintendo Wifi connector to go online for my Wii because I have no internet at my home what so ever. Will the Nintendo Wifi connector work?

If you have someone around you like a neighbor you can search for there access point.