|Lamp luminous flux(lm):
LED Tunnel Light 180Watts
1、the lamp uses imported chip，assuring the led to be high efficiency，low consumption and stable
2、Module structure provides larger conductive surface for better heat conduction. Lower light decay and longer life of the fixture would be achieved.
3、modulize design provided different application
4、wide input voltage range adopted suitable for any countries and areas
5、using built-in constant current output allows high electric energy conversion efficiency and good stability
6、Through the CE、ROHS、CCC、CQC certification
Whole Lighting Effect
Distribution Curve Flux
Color Rendering Index
LED Service Life
Grade of Protection
The Graphs Of Distribution Curve Flux
Color Temperature Diagram
Applicable to tunnel ，underground passage，railway，underground parking and other places required for outdoor lighting。
- Q:How to select LED lamp driver power correctly
- The current LED lamp fault is mainly in the power supply, so the main problem is to solve the power supply. As the current LED power supply is still a lack of mandatory unified standards, the power supply on the market fragmented, single, multi-channel, different sizes, it is difficult to replace. With the advent of the market of super power LED lights, LED tunnel lights, LED drive power failure frequently, coupled with the LED street lamp driver design of built-in power supply used, often resulting in LED lamp power supply maintenance difficulties, and some manufacturers lack of customer service repair services, so the owners of complaints are heard everywhere, by the media hype caused by misunderstanding the LED lamp, the effect of LED industry reputation.
- Q:Why is the highway tunnel lights two yellow white?
- Inside the tunnel was light yellow is white, is by the maintenance department according to the actual situation of the installation, general yellow incandescent lamp, white LED tunnel lamp, incandescent lamp life more electricity, but the price is low, the opposite of LED. Under normal circumstances, the illumination inside the tunnel will be adjusted according to the brightness of the environment. When the brightness of the tunnel is low, the light in the tunnel can be weakened.
- Q:Led turn on the tunnel light, connect the power supply, and then turn on the light system device. Why not turn on the light?
- China is the country with the largest number of tunnels in the world. In recent ten years, the tunnel lighting has developed rapidly. The pilot project of "ten cities and ten thousand lights" launched in 2009 has accelerated the application of LED in tunnel lighting. For a time, Shanghai, Guangdong, Fujian, Zhejiang, Chongqing and other 11 provinces and cities, launched dozens of nearly 100 kilometers of LED tunnel lighting pilot.
- Q:LED street lights, LED flood lights, LED courtyard lights, LED tunnel lights, LED solar lamps, current market capacity and saturation? Who knows, please?
- The LED market is far from saturation, you said these lamps accounted for less than US market for 1/100, not everyone does not want to buy LED lighting products, because we don't want to do the experiment, now LED in lighting there are many shortcomings, lack of brightness, brightness 60LM/W, brightness is not enough, electricity price compared with the ordinary lamp, the price is too expensive, the only advantage is long life, but now LED is not mature, reduced life expectancy.
- Q:What is the IP protection level for tunnel lights?
- LED tunnel light, the protection grade is divided into dustproof and waterproof. For example, BYD GL-03 IP65, the IP logo, International refers to Protection, IP protection class is composed of two digits, the first digit indicates the lamp dust level to prevent intrusion of foreign objects, second numbers represent the tightness of moisture intrusion and waterproof lamps. The larger the number, the higher the protection level.First number: the dividing range is 0-6 and 6 is the highest level, which means that dust can be completely prevented from invading.Second numbers: the division is 0-8, 8 is the highest grade, the protection against flooding, and can be immersed in water for a long time, the specific time is not clear.
- Q:Comparison of LED tunnel light and high pressure sodium lamp
- In theory, it should be able to do so, when it is quite difficult to implement.1 from the light emitting efficiency, high pressure sodium lamp can reach 120lm/w, and now LED long 90lm/w (of high power, low power due to decay cannot be overcome for the use of lighting), can achieve this level of the whole world is only Osram, Lumileds, Cree, the 3 companies, the other is the gap between the. If you count the two time, you can only do more than 80lm/w. However, when the junction temperature of LED is high, the luminous flux maintenance rate is decreased by up to 70lm/w. So now LED street lights, tunnel lights can do 70lm/w, that is, a few rare, this also refers to the color temperature greater than 4500k cold light, white light efficiency is lower.2., although from the light effect, LED is far less than high-pressure light, but can pass two times, optical uniformity can be much better than the current high-pressure light. In addition, color rendering is also an advantage. High pressure sodium lamp is only 30, while LED is basically larger than 70. So, from human perception, the LED tunnel light is much better than the high voltage sodium lamp.3., from the energy-saving point of view, now the best LED street lamp test results are 13% energy saving, relative to the traditional high pressure sodium lamp. The so-called 60%, 70%, smiled and passed.4., although LED theoretically has 50000 hours of life, it then maintained 70% luminous flux indicators, and the conditions are very harsh. The biggest problem, no one has been waiting for such a long time.
- Q:Lighting requirements for LED tunnel lamps
- Considering the factors of tunnel lighting design, interior decoration, line length, pavement type, no sidewalks, road link structure, design speed, traffic volume and vehicle types, but also consider the color of light source, lamps, lighting arrangement, level, and human adaptation accesszone luminance condition, tunnel lighting design is to solve this a series of problems.
- Q:Where is the difference between the LED light and the tunnel light?
- The LED projection lamp belongs to decorative lighting, and the LED tunnel lamp belongs to function and can illuminate. I also know with the engineer from Guangzhou, you can go there and ask
- Q:How do I install the LED tunnel light?
- Power supply wiring is the same! When installing, pay attention to dust, waterproof, anti leakage, multi LED tunnel lighting, lighting can be alternating, do not work for a long time without rest. Even people can't stand it. What do not understand, ask: Yan Sen lamps and lanterns
- Q:Comparison of high pressure sodium lamp and LED lamp in tunnel
- LED warm light, can also solve the problem of penetrating. Only LED lamp one-time investment larger.
1. Manufacturer Overview
|Annual Output Value
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
|No.of Employees in Trade Department
|No. of Production Lines
|Product Price Range