|Lamp luminous flux(lm):
LED Tunnel Light 180Watts
1、Professional lens design，better proformance for tunnel lighting
2、Save 80% more energy compared with traditional lighting fixtures
3、high quality Led Tunnel Light is new high durability lamp
4、the lamp uses imported chip，assuring the led to be high efficiency，low consumption and stable
5、through the CE 、CQC、CCC、ROHS certification
6、the lamp uses imported chip，assuring the led to be high efficiency，low consumption and stable
Whole Lighting Effect
Distribution Curve Flux
Color Rendering Index
LED Service Life
Grade of Protection
The Graphs Of Distribution Curve Flux
Color Temperature Diagram
Applicable to tunnel ，underground passage，railway，underground parking and other places required for outdoor lighting。
- Q:I would like to ask Chongqing has the strength of LED energy-saving products (such as LED street lights, tunnel lights, etc.) distributors what?
- The mainland is relatively small, do LED lights. Coastal areas are more, I know that there is a company in Shenzhen to do LED lights, I asked the price, LED street lamps, fluorescent lamps are not very expensive
- Q:How to select LED lamp driver power correctly
- Intelligent control is one of the advantages of LED lamps, and power supply is the key of intelligent controlIntelligent control in LED street and LED tunnel lighting application conditions of the most mature the most obvious effect, intelligent control can be controlled in different time, to realize the stepless lamp power according to the road traffic density, can meet the application requirements, and realize the enormous energy-saving effect, can save a lot of money for the public road authorities. The application of tunnel lighting can not only save energy, but also automatically adjust the brightness of tunnel entrance and exit according to the brightness outside the tunnel, and provide a visual over stage for drivers to ensure driving safety.
- Q:LED what are the tunnel lights?
- LED tunnel light is one.LED tunnel lamp is a light efficiency energy-saving lamp, using a light emitting diode (LED) as the light source, high luminous efficiency, long life, with a different mirror to achieve multi-purpose lighting; and after softening treatment, will make people dizzy or other discomfort. The ballast adopts overheat protection technology to ensure the service life of the lamp. Imported high purity mirror anodized aluminum material is used as reflector, and the power factor is greater than 0.9 through precise light distribution design,
- Q:Why is the highway tunnel lights two yellow white?
- Inside the tunnel was light yellow is white, is by the maintenance department according to the actual situation of the installation, general yellow incandescent lamp, white LED lamp, incandescent lamp life more electricity, but the price is low, the opposite of LED. Under normal circumstances, the illumination inside the tunnel will be adjusted according to the brightness of the environment. When the brightness of the tunnel is low, the light in the tunnel can be weakened.
- Q:What is the IP protection level for tunnel lights?
- As an instrument used in explosive hazardous areas, the protection level of its enclosure should also be specified and given a certain amount of code, that is, the IP grade number.The shell protection class specified by IEC144 is expressed by a code corresponding to its impact against external objects, puncture ability and water resistance. For example: this type of instrument measuring circuit board should not remove the shell, otherwise it will violate the minimum requirements proposed by IP40. The protection level is made up of two digits, with the word "IP" in front of it.
- Q:Comparison of LED tunnel light and high pressure sodium lamp
- In theory, it should be able to do so, when it is quite difficult to implement.1 from the light emitting efficiency, high pressure sodium lamp can reach 120lm/w, and now LED long 90lm/w (of high power, low power due to decay cannot be overcome for the use of lighting), can achieve this level of the whole world is only Osram, Lumileds, Cree, the 3 companies, the other is the gap between the. If you count the two time, you can only do more than 80lm/w. However, when the junction temperature of LED is high, the luminous flux maintenance rate is decreased by up to 70lm/w. So now LED street lights, tunnel lights can do 70lm/w, that is, a few rare, this also refers to the color temperature greater than 4500k cold light, white light efficiency is lower.2., although from the light effect, LED is far less than high-pressure light, but can pass two times, optical uniformity can be much better than the current high-pressure light. In addition, color rendering is also an advantage. High pressure sodium lamp is only 30, while LED is basically larger than 70. So, from human perception, the LED tunnel light is much better than the high voltage sodium lamp.3., from the energy-saving point of view, now the best LED street lamp test results are 13% energy saving, relative to the traditional high pressure sodium lamp. The so-called 60%, 70%, smiled and passed.4., although LED theoretically has 50000 hours of life, it then maintained 70% luminous flux indicators, and the conditions are very harsh. The biggest problem, no one has been waiting for such a long time.
- Q:Lighting requirements for LED tunnel lamps
- Tunnel lighting energy-saving is proposed for light source, lamps, lighting methods and other requirements, including energy-saving lighting design and energy saving management and energy saving, the energy-saving lighting design is the most important energy saving measures, including the idea of reliable and reasonable standard, new value, and the use of efficient lighting, light source, high efficiency increase the light reflectance and lighting control and energy saving etc.. LED compared with the traditional light source, is the biggest advantage of energy saving and stability, so based on the characteristics and advantages of LED, improve the efficiency of LED chip, reasonable light distribution design to enhance the overall efficiency of the lamp, it is an important issue to solve LED tunnel lighting.LED light effect is the basic measure of the efficiency of the tunnel light, LED tunnel lights according to the requirements in practice, the light efficiency reaches a certain level in order to meet the need to replace the traditional road lighting lamp, metal halide lamp demand.
- Q:Can the LED power supply be used as a street light / overhead light / tunnel light?
- Super long life. Can use more than 50 thousand hours, LED street lamp is 5~10 times the traditional street lamp life, Kun exhibition LED street lamp provides three years of quality assurance;
- Q:How do I install the LED tunnel light?
- Power supply wiring is the same! When installing, pay attention to dust, waterproof, anti leakage, multi LED tunnel lighting, lighting can be alternating, do not work for a long time without rest. Even people can't stand it. What do not understand, ask: Yan Sen lamps and lanterns
- Q:Are there any different requirements for the use of ordinary industrial and mining lamps, street lights, tunnel lights?
- The light distribution curve of lamps and lanterns is very different, reasonable use of light distribution curve, the use of less lamps to achieve the same illuminance
1. Manufacturer Overview
|Annual Output Value
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
|No.of Employees in Trade Department
|No. of Production Lines
|Product Price Range