1.0MM HDPE Geomembrane for Landfill to Prevent the Waste Water

Ref Price:
Loading Port:
Payment Terms:
Min Order Qty:
10000 m²
Supply Capability:
500000 m²/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

Structure of 1.0MM  Hdpe Geomembrane for  Landfill

1.Geomembrane has good air and water permeability to let water flow through it so as to effectively control sandrock running-down.

2.Geomembrane has good water transmissibility, it can form drainage channels inside soil mass to drain redundant liquid and air out of the soil mass.

3.Geomembrane helps to enhance the soil mass' tensile strength and non-deformability and structural stability so as to improve soil mass quality.

Main Features of 1.0MM  Hdpe Geomembrane for  Landfill:

1.It can effectively make the concentrated stress diffuse, transfer or decompound, and prevent the soil mass against the destruction of outside force.

2.It can prevent the mixture of sandstone, soil mass and concrete of upper and lower layers.

3.Its mesh is hard to jam by virtue of the compliancy and motility of the reticulation formed by indefinite form fibrous tissue.

4.High water permeability-it can keep good water permeability even in the pressure of soil and water.

5.Corrosion resistant-it is made from polypropylene fiber or terylene or other chemical fiber, featuring resistance to acid and alkali and oxidation, non-corroding, no worm-eaten.

6.Easy construction-low weight, easy operation, simple construction


1.0MM  Hdpe Geomembrane for  Landfill Images


Waterproof Polyethylene Geomembrane with Colorful for Pond 

Waterproof Polyethylene Geomembrane with Colorful for Pond


Waterproof Polyethylene Geomembrane with Colorful for Pond

Waterproof Polyethylene Geomembrane with Colorful for Pond

1.0MM  Hdpe Geomembrane for  Landfill Specification :

















Yield strength









Break strength









Yield elongation/%


Break elongation/%



Tear resistance/N









Puncture resistance/N









Stress crack resistance/h



Carbon black content/%


Carbon black dispersion

Carbon black dispersion(only near spherical agglomerates) for 10 different views 9 in categories 1 or 2 and 1 in category 3


Oxidative induction time/min

Standard OIT≥100

High pressure OIT≥400


Oven aging at 85°C

Standard OIT-% retained after 90days


High pressure OIT-% retained after 90days



UV Resistance                         


Standard OIT retained after 1600hrs


High pressure OIT retained after 1600hrs



-70°C Low temperature impact brittle property







Dimensional stability/%



1. How about the delivery time?    

    Two weeks upon receipt of down payment. 

2. What kind of payments do we accepted?   

   T/T, L/C, WesternUnion, MoneyGram. 

3. What's are the MOQ?   

    Normally the MOQ is 5000 SQM in theory. 

    And we can provide you free samples for quality inspection.  

4. Do you charge for the samples?   

    Accordeing to our company policy, the samples are freee, we only charge the freight fee. And we will return the freight fee in your second order.   

5. Can you produce the product according to customers' requirements?

     Sure, we are professional manufacturer, OEM and ODM are both welcome

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:What is the material of HDPE geomembrane?
HDPE---High-density polyethylene+ carbon black
Q:What is the method of sticking membrane on cabinet?
First, clean cabinet surface. It is recommended to use medical alcohol with 75% concentration, which is easy to clean and dry. Measure the length, width and height to stick with tape, then cut on the purchased membrane. To avoid waste, you'd better draw on draft paper. Finally, stick from top-down, and stick right bit by bit, or it would be difficult to handle if you find slanting in the end. .
Q:The main uses of imported HDPE geomembrane?
anti seepage
Q:What are the requirements for steel-plastic composite geogrid standard?
Q:What is the method of installing screen protector for PSP?
Don't be in a hurry when getting the film, clean up the screen of PSP to wipe out the dust, then prepare a card (or an ID card). Then prepare some diluted liquid detergent (that is, the mixture of water and a little detergent). The purpose of preparing it is to lubricate, then a napkin is also needed. Start when all the preparation is done, you can paste the screen. Drip a few drops of liquid detergent on the wiped PSP screen. The tear off the adhesion surface of the film, gently cover on the water, then rub the water till it is apread between PSP and film. If you only use water, you will find it difficult to rub. After the completion, rub the film to the correct position, and the first step is done. There must not be too much water in the process, or it is easy to be rubbed to the button on the edge. The next step is the essential. We use the card to remove the water starting from the middle of the film. We should pay attention that when removing the water, it will be blown out from the film, then use the napkin to absorb the water. The purpose is to avoid the water enter the button, then you can remove the bubbles inside. Repeat it and after a while the water will certainly be removed, and then check that if there is any bubble, and if there is, remove it. After removing the bubbles, the film will fit your PSP exactly, then you can paste the two films on the sides by the same method. Now all you have to do is to wait the water between the film and PSP evaporate, and after the evaporation you will be happy to see the effect. I want to explain why we use detergent. There are two reasons: first it is colorless, second it plays the role of lubrication. So it is very important to use it, and the water between the film and the PSP will not leave traces.
Q:How to use the mobile phone laminator?
The mobile phone is fixed on the mobile phone slot, and then switch the torque on the back to lift the height to the mobile phone screen. The method of application of mobile phone laminator read 2 take out the fixed SMD, one side is attached on the mebrane number 2, the mebrane is aligned at the back of screen mobile phone, and then the other side of the fixed SMD is pasted on the lifting platform. The operation method 3 of mobile phone laminator open the mebrane and clean the mobile phone screen, uncover the number 1 label of the mebrane, and press slowly the mebrane by the roller. Method 4 of using mobile phone laminator tear off the number 2 film, wipe the screen of the mobile phone with a clean cloth, which can squeeze out the rest of the bubble. Sticking the film is finished. The notice of the method of using mobile phone laminator It must clean the screen mobile phone before sticking the film.
Q:How does the insulation effect of the heat of the glass film?
It is not very good, and the anti ultraviolet is proposed.
Q:How to choose the stick membrane for decoration?
When we stick the insulation film, we always want the better heat insulation, but the lighting of the room should also be considered. If your glass windows is very large and light is too strong, we can select the products that have high insulation, namely products of which the total heat rate is above 70%. If the glass is small and the lighting is normal, you can not just consider high insulation, but translucency should also be taken into account because when it is cloudy, the room becomes relatively dark and you have to opened indoor light sources earlier than usual.We know that a glass film is an energy-saving product, but it will waste energy when you turn on the lights in advance.Products of which the light transmittance is 30% -50% should be used in room that has average lighting.In rooms that have poor lighting and small windows, you should choose models of which transmittance is more than 50%.
Q:Should the quality inspection of geotextile and geomembrane be done in laboratory.
It depends on the requirements of the construction side and supervising unit. If they require an inspection in an authoritative third-party laboratory, the requirement should be met. 2. If there are no clear requirements being made, the inspection is unnecessary. Generally speaking, the manufactures will always provide a report that the geomembrane pass the test done by themselves. Unqualified product can't escape into the market. Besides, construction side will have an inspection in their own laboratory. If the reports given by manufacture and construction side all show that the product pass the test, more inspection is unnecessary. If they are not in accordance with each other, a further inspection should be done.
Q:How to install the electric heating film?
It can be installed under the floor when decorating the house. It can begin to work when temperature control is intalled by groups parallel connection method. Of course, it is quite simple when saying it. It is better to ask a professional company to install this kind of electric products for you. First, you can fix the baseboard and then put insulating layer with reflective film and electrothermal film on it. In the final step, you can install some bamboo curtain splints or decorate fabric with good heat dissipation.

1. Manufacturer Overview

Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range