Steel Galvanized

Hot Products

Drywall Profile-Stud for Partition System

Gypsum Board Steel Frame or Keel Light Keel

Cold formed Profile Steel Drywall for ceiling structure

Steel frames profiles for plasterboard Partition

Steel Profile-Drywall Grid System for Partition

Galvanized steel profiles U/C channel for drywall

Galvanized Light Steel Keel Main Channel Drywall Partition Light Steel Keel

Drywall Profile-Track for Partition System

Factory Supply Light Steel Keel T-Bars Galvanized Ceiling T Grid Good Quality Galvanized

Steel Construction Profile Keel Good Quality Galvanized

FAQ

Wood keel can be used to ceiling, can be used to do the wall? Light steel keel can be used in what place?

Many temporary buildings will use wood keel to do with the wall, light steel keel more for long-term construction

What is the light steel keel gypsum board partition? What are the characteristics?

Lightweight wall material gypsum block.It has the characteristics of light weight, high strength, good durability, accurate size, smooth surface, no cracking, fire protection, good heat insulation effect, and good respiratory performance and good sound insulation. Widely used in buildings, hotels, entertainment centers, street walls of the wall partition. It is easy to build, a wall into the installation of fast, soundproof, fire, ecological, for non-load-bearing wall, multi- Alternative light steel keel, is a substitute for paper gypsum board decoration partition upgrade, cost-effective, market advantage. Can be combined within the partition wall, sub-wall and wall from the insulation, etc., played a variety of material advantages, a variety of combinations, insulation energy, sound insulation, fire, light, easy assembly, low cost, market space.

Light steel keel wall circuit how to wear pipe

1, to C-type vertical keel on the threading hole as the basis, first determine the direction of the upper and lower ends of the keel, try to align the threading hole. Vertical keel length size, should be measured according to the size of the scene. The premise is to ensure that the vertical keel can be along the ground, along the long keel slot slide. 2, light steel wall vertical keel installation spacing, according to the actual width of the panel size and wall structure design may be. 3, vertical keel installed in place, should ensure that the vertical. Door and window openings should be taken double row of vertical keel reinforcement. When the design requirements for the steel connection, the vertical keel and the edge along the top keel of the fixed, the application of self-tapping screws or shaft rivets to connect. sixth,

Light steel keel gypsum board partition should pay attention to what quality problems

1, contact with the stability of the keel through the keel when the wall height of not more than 3m can be set to a wall height of 3-5m should be set up two, more than 5m should be set to 3. 2, light steel keel gypsum board partition wall should be done to the structure board. 3, for the sound insulation requirements of the partition, should be along the top keel and along the keel and the main structure of the junction, the pad with long sound insulation tape, and in the gypsum board and the main structure of the embedded sealant, Fill 50mm thick glass wool.

Will the light steel keel, brick block, light partition wall do inside the wall what are the advantages. Including the price, as much as possible, thank you!

The Brick block from the weight of large, said to do on the floor will increase the load on the building, upstairs is not convenient. Light wall panels are similar to light steel keel partitions. Is the price or light steel keel cheap. I do light steel keel project, and now plant, office buildings are using this.

To warm the above has been tiled, with light steel keel to build a wall, how to fix the keel?

With a hammer to drill the ground hole can be fixed to the ground. With glue, it is certainly impossible to nail

The room to remove the partition, can not retain the original light steel keel gypsum board ceiling?

It is possible that you said that the wall above is a beam, so that when you remove the wall, the gap between the two ceilings to do a false beam to solve. But if this place did not beam, then we must consider the demolition or not split!

What is the pros and cons of a brick or a gypsum board?

Part of course is the use of light steel keel gypsum board is now very popular I am doing this business