Propex Nonwoven Geotextile

Hot Products

ASTM HDPE Geomembrane for Aquiculture and Landfill Project Use

Lona De Geomembrana HDPE/LDPE/LLDPE

Geocell for Road Construstion and Wall Reinforcement

Atarfil Geomembrane Polypropylene Waterproof Roll Cmax

HDPE Pond Liner/HDPE Geomembrane with ASTM Standard

Waterproof HDPE Geomembrane with ASTM Standard

HDPE Geomembrane Liner for Aquaponics Construction

EPDM Waterproof Membrane for Roof Project

High Stabilization Geomembrane Liner Roll for Agriculture Industry

High-Density Waterproof Bituminous Geomembrane Roll for Seepage Control

FAQ

Geomembranes are tested for permeability using a variety of methods. One common method is to conduct a hydraulic conductivity test, where water is applied to the geomembrane under controlled conditions and the rate at which water passes through it is measured. Other tests include the use of pressure heads or gradients to determine the flow of liquids through the geomembrane. Additionally, laboratory tests such as the ASTM standard test methods are employed to assess permeability characteristics. Overall, these testing methods help determine the permeability properties of geomembranes and ensure their suitability for specific applications.

nan

1, can adjust the indoor temperature freely, low temperature radiant electrothermal film heating system can adjust indoor temperature at will within the set temperature scope via alternating current temperature controller set in every room, so that people can " save warm" flexibly and conveniently just like "save water" and "save energy". 2, convenient for economy, saving energy low temperature radiation electrothermal film heating system can start or close at any time according to the needs of users, so its operation is very economical. Electrothermal film floor heating occupation layer height, fast temperature rise, the temperature of electrothermal film can rise to 45 degrees within three minutes, and the floor will be warm within half an hour (the floor will be warm within two or three hours).The electrothermal film floor heating is the only floor heating which doesn't need cement backfill under composite wooden floors, and virtually electrothermal film floor heating is currently the most thin electric floor heating.

nan

It's good. Warm reflective film is a layer of aluminum foil which can reflect the infrared radiation produced by the heating film. Infrared radiation is a form of heat transfer. All the objects with temperature will produce infrared rays, even for the one of temperature of several degrees below zero. The fire is an example which transfers the energy through infrared radiation and does no harm.

nan

it is one of the important properties of machinery strength of paint film. Its physical meaning can be understood as the resistance of the film surface to the action of the other hardness of the larger objects. It can be determined by measuring the ability of the film to resist deformation when a certain mass load is exposed on the surface of the film, (including the ability of deformation caused by collision, indentation or scratching). the test equipment should have damped pendulum hardness, scratch hardness, indentation hardness ,ect..

nan

The hot-film electrothermal?film. Is is supporting the heat with the far infrared produced the heating carbon. This heat is not convection but can convey conduction. A long time hyperthermia can be gotten by thermal radiation so as to improve the body temperature, expand blood vessels, and promote metablolism. It can also produce far infrared and ion. It not only has a good performance of supplying heating, but also takes the safe of the heating system into consideration. The hot-film heat is due to the use of carbon as a heating body to produce radiant heat step, using the following 1um precision printing technology produced, known as surface heat generation. The surface of the heating element is made of by the carbon thin?film processed by the 150 centigrade temperature.

nan

You can use a tissue to adsorb it. The water surface of the tank is exposed to the air, so sometimes there will be oil film on it. The film will influence the oxygen content of the water. It is also recommended that you do not use mineral water to breed fish, especially for raising the paracheirodon innesi. This kind of fish like to live in the faintly?acid soft waterwith the temperature of 22-24 degrees, pH value of 6.4-6.8 and hardness of 4-8.

Yes, geomembranes are suitable for use in fish farming tanks. They provide a durable and impermeable lining that prevents water leakage and protects the fish from contaminants. Additionally, geomembranes are resistant to UV radiation, chemicals, and biological degradation, making them an ideal choice for fish farming applications.

nan

Preservative film principle: 1. 1. Prevent water evaporation, and play the function of sealing; 2. Prevent loss of the original flavor of food in storage; 3. Isolate air, and prevent food oxidation (or infection); if you want to do the experiment of this kind, it is best to choose the anaerobic bacteria, and you should pay attention to the seal degree to prevent leakage. You should also be attentive of the type of the chosen food, and note whether it is suitable for the growing conditions of the chosen bacteria and pay attention to the temperature, humidity, shaking table rate, etc.