Jewsons Paving Slabs

Hot Products

60kg Petrol Tamping Rammer with Robin EH09

Diesel Reversible Plate Compactor

RM70 Electric Motor Rammer Hammer, Stamping Hammer 2.2kw 3kw

RM75 Robin or Honda Gasoline Engine Rammer Hammer, Stamping Hammer

Hollow Air Drill

450kg Diesel Reversible Plate Compactor with Yanmar Engine

Vibratory Rammer

RM80-1 Robin or Honda Gasoline Engine Rammer Hammer, Stamping Hammer

330kg Petrol Reversible Plate Compactor with Honda Engine

Gasoline plate compactor 100KG type drived by Gasoline engine

FAQ

What if the oil for two stroke ramming machine diagram? What are the requirements for the viscosity grade? Urgent!

Hello friend！ Hello, friend, you said this thing, he used the oil, there is not much demand.

What should be noted in the operation ramming machine construction?

(4) when the rammer is operated, no one in the front of the machine shall be 2m, and when the multiple rammer is rammed, the left and right distance of the machine shall not be less than 5m, and the operators shall wear insulating shoes and wear insulating gloves.(5) the random power line should maintain the margin of 3-4m. When the power cord is winding and broken, the power should be cut off in time, and the operation should be stopped and repaired immediately.(6) before the ram tamper, power off, tie up the eccentric block and wire the cable. After work, power off, lock, put in the dry place.

The story of a ramming machine on the trip what's wrong.

Value, and insulation and casing, take a look at what you do not understand can ask me again, I hope to help you, also hope you click adoption

Three-phase electric rammer or two-phase power

Another difference is that the power used is different. Usually the home and no three-phase power supply using single-phase motor, power is usually relatively small, industrial and high-power places are selected three-phase motor.

Ramming machine operator must wear what labor protection supplies

5. random power should keep the 3-4m margin, found that cable kinking, winding, rupture, should be timely off, stop operation, repair immediately. The 6. moved to power tamping machine, tie eccentric block, disc good cable. When the tamping machine is put into the pit, the rope is put down, and the rammer is not allowed to be pushed. After the work, the power box is locked off, and the rammer is kept in the dry place and kept in the damp and rainproof place.

Should the foundation be compacted by tamping machine?

Yes, the filling soil must be compacted to reach the requirements of the compactness given by the drawing or specification

Flat type ramming machine with several pole motor

The main technical parameters of the 200 type vibrating plate compactor: type 200 flat vibrator motor power: 3KW motor speed: 2880 RPM 2, climbing capacity: 17 "vibration frequency: 3600 / min plate size: 0.22M2 excitation: 20KN speed: 20m/min

Classification of rammer

The fire is rammed under the action of the explosive force of the combustible mixture, so it jumps off the ground from the top to the top, and then hits the ground and strikes the soil under the weight of itself. The hammer falls and the body moves forward step by step.Electric breaststroke rammingMade by the principle of rotating inertia force, it is composed of rammer, rammer, eccentric block, belt pulley and motor. The motor and the driving part are mounted on the skid seat, and the rear end of the rammer frame is hinged with the drive shaft, and the rammer can swing up and down the shaft under the eccentric force of the eccentric block.