Car Window Channel Rubber

Hot Products

Omega Furring Channel Stud Track C Gypsum Light Steel Channel Metal Stud and Track Price38121.0mm

Galvanized Light Steel Keel Main Channel Drywall Partition Light Steel Keel

Drywall Profile-Stud for Partition System

Galvanized stud for gypsum drywall metal stud and track

Galvanized steel profiles U/C channel for drywall

Factory Supply Light Steel Keel T-Bars Galvanized Ceiling T Grid Good Quality Galvanized

Galvanized Profiles for Dry Wall Galvanized Profiles

Steel Profile-Drywall Grid System for Partition

Stud profile ceiling metal furring channel for Drywall

construction building materials steel profile galvanized metal stud and track

FAQ

75 light steel keel wall to do 6m high, need reinforcement? How to strengthen?

Must do 75 keel, it is recommended to add angle iron or square tube reinforcement, do not forget to do heart keel

I would like to have a toilet in the house, bathroom with mineral wool board cut off or light steel keel gypsum board line?

These two estimates are problematic, you can use light steel keel cement pressure plate nail steel wire mesh paint, do waterproof post-paste wall tiles, the following also do waterstops

Light steel keel gypsum board partition design should pay attention to what the problem

In order to be able to make decoration more perfect, it is recommended that you choose the decoration manufacturers, to be careful, we must choose the same brand of all products. The

Lightweight wallboard light steel keel how to construction

Wood keel installation to keel cross-sectional area and vertical and horizontal spacing should meet the design requirements, lightweight partition plate skeleton horizontal, vertical keel should be used to open half a tenon plus glue, plus nail connection. Before installing the panel, the keel should be fire-treated, the wall should be in accordance with the design requirements, along the ground, the wall top wall and the width of the wall line, the width of the wall should be consistent with the thickness of the wall should be clear, Accurate, the installation of vertical keel should be vertical, keel spacing should meet the design requirements.

4 m long prefabricated board can do light steel keel double gypsum board wall?

Yes, because the prefabricated board toughness is better, and its specifications are not the kind of chunks, if the chunk can withstand the weight will be reduced in the middle of the possibility of falling to increase .. Light steel keel wall itself The weight is not heavy, coupled with the ceiling is also force, then the weight of the ground will be reduced accordingly

Light steel keel wall circuit how to wear pipe

Install the crossed keel (lower threshold). Fixed with a nail, or first drilling, and with the expansion bolts connected to fixed. Installation should be installed according to the center line and edge, both ends of the top to the structural wall (column) surface, the final fixed point from the structure of the facade should not be greater than 100mm; nail or expansion bolt spacing should not be greater than 800mm. Installation should ensure that the keel level and straightness.

Light steel keel wall in the end is how much money to know

The partition depends on whether you are single or double-sided single-sided 30 a square double-sided 50 a square called 70 are cut your gypsum board has 13 to 23 blocks have you do partition And not good gypsum board as long as 14 to 15 pieces of gypsum board on it

The room to remove the partition, can not retain the original light steel keel gypsum board ceiling?

But this will be more expensive construction costs