100 Kw Solar Inverter

Hot Products

FAQ

How does the spindle drive system of the inverter realize the positive and negative control of the main pole?
Communication can reach a longer and more stable, generally better of the city 485
Motor nameplate on the standard 2P, I set the number of motor pole in the inverter, is set 2 or 4 pole?
Then the motor nameplate on the standard 2P, it must be 2-pole motor, synchronous speed = 60 seconds x frequency (mainland 50Hz) / pole pairs, you can also look at the rated motor speed, about 2940 rev / 60s, so the inverter Set the number of motor poles, is set 2 pole, I hope you can be satisfied.
Delta VFD-F frequency converter how to adjust the number of poles
P148 look, this is to correspond to the number of poles of the motor, not to adjust the number of poles of the motor
Laptop power supply 20V 3.5A can use 20V 4.5A power adapter Mody, what impact?
can. For a constant voltage power adapter, the following requirements can be replaced: The replacement of the new power adapter output voltage is the same as or similar to the output voltage of the original power adapter. Replacement of the new power adapter maximum output current is not less than the original power adapter maximum output current. Replacement of the new power adapter with the original power adapter interface definition and shape the same. Replacement of the new power adapter Other non-major electrical performance indicators, not less than the original power adapter of the corresponding indicators. Notebook original power adapter nominal rated current of 3.5A, indicating that the laptop itself does not exceed the input current of 3.5A, for the rated current of 4.5A power adapter, the drive is no problem in this load.
Inverter ACS355 If the speed is outside the allowable range, how to set the limit value
Remember, 2001 this should be set to a negative number, set to a positive number of your speed will never be less than this value.
Is it possible to use a different laptop's power adapter?
For the power adapter, whether access to equipment, the following aspects of the measurement standards: Interface form The interface plug and socket used must be dimensioned. Voltage size The output voltage of the adapter is the same as the required voltage of the connected device (eg notebook). Inconsistencies may not be able to start or burn the device properly. Current or power The power of the adapter is greater than the maximum power required by the device. Power is not enough, may cause the voltage to drop, the adapter is hot, or burn the adapter. More than the above, the use of more power of the power adapter, while meeting the interface and voltage conditions, it can be replaced.
How to lift Yaskawa inverter base blockade?
Note: the base blockade is to deal with ul or ce such a special application of security agencies, meaning that when the parking limit action after the base blockade even if the program can not malfunction, relative to the emergency stop loop more harsh, they will directly cut off the power power supply. In fact, it is a white protection function, if we are not difficult to find the analysis, when over-voltage or undercurrent, the panel will show BB alarm, BB is the base block, is the base blockade.
What is the IGBT? Our inverter IGBT fried,
Name is the FET, the price of this thing is more expensive,